Schumacher Mi4 Cx
 

Schumacher Mi4 Cx rolling chassis ( 7 meetings old).

Fitted with following options:

2mm Soft Weave Chassis
Long Top Deck Conversion (2 meetings old)
Alloy Spring Retainers
4 Groove Camber Plates
Alloy Layshaft Pulley
Spec R Gear Diff
Xray Rear Belt
OTM (Chris Betts) Steering Bell Crank run by Schumacher Team Drivers
Titanium Turnbuckles
Alloy Servo Mounts
Narrow Front Hexes
Purple alloy shims to replace quick clips on wishbones.
Hara Black Springs fitted all round.
Bulkheads modified to remove unused parts as a result of long top deck conversion. Steering bell crank also mounted independently of bulkheads to eliminate torque steer.

Spare parts include:

2.5mm Soft Weave Chassis (1 meeting)
2mm Std Weave Chassis (Never Fitted)
Front Belt (NIP)
Bando Strong Rear Belt (NIP)
Black Ball Cups x 8 (NIP)
Our drive Slider Insert x 4 (NIP)
Hara Purple Springs (Never Fitted)
89t and 85t 48dp spur gears
118t, 114t and 106t 64dp spur gears.
Pair of front Steering Hubs
Pair of extra flex C hubs
Full Front and Rear Roll bar sets
Std Steering Bell Crank
Pair of Std 3 Groove Camber Plates
Pair of Std Hexes.
Std Layshaft Pulley
Pair of Gear Diff Outdrives.

Also included will be a futaba s9550 low profile servo with a lug removed and a set of Sorex 32ry brca tyres. These have completed no more than 3 runs.

1 Mazda Speed 6 and Ltcr shell supplied, both used but not bent or bashed.

£220 posted and will listen to offers. Email me at [email protected] or pm on here if there are any questions. Needs to go.

Thank you for looking

[IMG] http://img864.imageshack.us/img864/981/83966988.jpg

Uploaded with ImageShack.us [/IMG]
[IMG] http://img846.imageshack.us/img846/9215/cx2k.jpg

Uploaded with ImageShack.us[/IMG]
[IMG] http://img440.imageshack.us/img440/9431/cx3h.jpg

Uploaded with ImageShack.us[/IMG]
[IMG] http://img403.imageshack.us/img403/3755/cx4d.jpg

Uploaded with ImageShack.us [/IMG]
http://img341.imageshack.us/img341/5586/cx5.jpg

Uploaded with ImageShack.us