SLIPPER SETUP FOR DURGA/BALDRE
 

AS TITLE PLEASE

slipper
 

Hi mate

easy really and its not hard and fast rules

for me i just adjust until the slipper slips for say 2 or 3 feet under full accleleration from standstill.....you can hear em whine a little when they slip.


other tip as given to me from jimmy (oople owner)

takes of top plates then lock all wheels on the ground - turn the spur with your finger - it should rotate on the shaft - if it dosent and the shaft turns with it - this means you rear diff is too loose...

slippers do make the difference - a pals lazer zx5 was very hard to drive until we lossened slipper - it stops the back end from breaking away coming out of corners under power ...

slipper
 

thanks for the advise mate, will use it when i get one thats what the thread was for, maybe i worded it wrong i need a slipper clutch for the car. but thanks for taking the time out to reply to me its much appreciated.

oh i see
 

oops sorry fella - thats me not reading where your post was properly !

slipper clutch available from goldstarstockists if you are ok buying new

cant imagine they are too much