![]() |
Most likely breakages
What are the most likely parts that will break on the xxx-4 G?
I've already broken a shock shaft and now a front spindle carrier. I might order a few of these vulnerable parts but which ones are likely to go most? cheers A |
when i had one i broke the front diff cover and the front pivot support a few times
Neil |
front shock towers and wishbones. get the plastic wishbones if you can, not the expensive graphite ones.
|
the only thing i've nailed on mine is front shock towers,and front spindles. Since i doubled up on front shock towers though, i've not broke one. Think with doubling up though, the force of the impact might transfer to the front diff cover, and/or the chassis itself.
have you got the alloy pivot blocks? they seem to be a good idea, it was the first thing i bought for mine |
when i got the alloy pivot suports the chassis took the shock of the impact..but i am a rough git :D
|
Quote:
Every meeting i used to do front diff covers without fail.... but i had plenty with the car i got from Bathy ;) |
I think I broke a front gearbox housing once in 2 years of running the car. Towers MUST be doubled up or carbon ones, again in 2 years running like this I never broke where they mount onto the chassis BUT I used to run mini nuts on the back so by clamping the force of attaching the tower it spreads the load better and is less likely to crack the chassis. I never broke one in 2 years!
|
I never broke a thing on mine... strong as an ox (or is that oxo cube)
http://www.oople.com/rc/photos/telfo...ages/4wd31.jpg |
Shoule there be a dog in that picture?
|
Quote:
|
Quote:
|
Quote:
|
I remember Roundy found it hilarious, and started flapping it above his head while the race was still running, rather that wait till qualifying was over:)
|
All times are GMT. The time now is 04:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com