|
#1
|
|||
|
|||
![]()
What are the most likely parts that will break on the xxx-4 G?
I've already broken a shock shaft and now a front spindle carrier. I might order a few of these vulnerable parts but which ones are likely to go most? cheers A |
#2
|
||||
|
||||
![]()
when i had one i broke the front diff cover and the front pivot support a few times
Neil
__________________
![]() |
#3
|
|||
|
|||
![]()
front shock towers and wishbones. get the plastic wishbones if you can, not the expensive graphite ones.
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback |
#4
|
||||
|
||||
![]()
the only thing i've nailed on mine is front shock towers,and front spindles. Since i doubled up on front shock towers though, i've not broke one. Think with doubling up though, the force of the impact might transfer to the front diff cover, and/or the chassis itself.
have you got the alloy pivot blocks? they seem to be a good idea, it was the first thing i bought for mine |
#5
|
||||
|
||||
![]()
when i got the alloy pivot suports the chassis took the shock of the impact..but i am a rough git
![]()
__________________
![]() |
#6
|
||||
|
||||
![]()
Yes you are
![]() ![]() Every meeting i used to do front diff covers without fail.... but i had plenty with the car i got from Bathy ![]()
__________________
|
#7
|
||||
|
||||
![]()
I think I broke a front gearbox housing once in 2 years of running the car. Towers MUST be doubled up or carbon ones, again in 2 years running like this I never broke where they mount onto the chassis BUT I used to run mini nuts on the back so by clamping the force of attaching the tower it spreads the load better and is less likely to crack the chassis. I never broke one in 2 years!
__________________
Nortech is ACE! |
#8
|
|||
|
|||
![]()
I never broke a thing on mine... strong as an ox (or is that oxo cube)
![]() |
#9
|
||||
|
||||
![]()
Shoule there be a dog in that picture?
__________________
Nortech is ACE! |
#10
|
||||
|
||||
![]()
Didn't you hit the rostrum??
__________________
Xray, Orca, 1UP Racing, Avid, X Factory UK, RC Disco, Hudy, RichPaint, RDT products, Screwz4rc http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#11
|
|||
|
|||
![]() ![]() ![]() ![]() ![]() |
#12
|
|||
|
|||
![]()
Nope, just a random crash on the banked Telford straight.
|
#13
|
||||
|
||||
![]()
I remember Roundy found it hilarious, and started flapping it above his head while the race was still running, rather that wait till qualifying was over
![]()
__________________
Xray, Orca, 1UP Racing, Avid, X Factory UK, RC Disco, Hudy, RichPaint, RDT products, Screwz4rc http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
![]() |
Thread Tools | |
Display Modes | |
|
|