oOple.com Forums - Loose rear

Page 2 of 2

Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)

- Yokomo (http://www.oople.com/forums/forumdisplay.php?f=21)

- - Loose rear (http://www.oople.com/forums/showthread.php?t=2806)

NeilD

28-03-2007 09:11 AM

The delivery times are so quick it's unreal, they give the best service i've had when ordering online.

IndyYokomo

11-05-2007 04:26 AM

source for YS-5L-2T shafts

I have tried Yokomo USA, RC Champ, several other online suppliers but no one has these in stock. Does anyone have a line on some? Or know what other manufacturer's shafts would work? Thanks for any suggestions.

cabbynate

11-05-2007 06:38 AM

Quote:

Originally Posted by IndyYokomo (Post 38660)

Are these shock shafts for the BX? If so look in the new products link on Yokomo USA'a web site.......

dummy

11-05-2007 07:19 AM

Quote:

Originally Posted by IndyYokomo (Post 38660)

use assoc 1.02" shafts. they are .8mm longer i think. very close anyway.

IndyYokomo

11-05-2007 12:59 PM

Associated vs Yokomo Shafts

Associated shafts are smaller in diameter. Has anyone tried them? Do they seal ok? These are the longer than stock rear BX shafts for use with the modified shock mount.

dummy

12-05-2007 12:36 AM

Quote:

Originally Posted by IndyYokomo (Post 38723)

Associated shafts are smaller in diameter. Has anyone tried them? Do they seal ok? These are the longer than stock rear BX shafts for use with the modified shock mount.

actually they're slightly wider in diameter. got them on mine. no problems at all except its a bit tight getting on the piston..

johnnyboy

12-05-2007 03:11 AM

A/E shafts are about 2.5mm in diameter vs Yokomo's 2mm. Kyosho make a 50mm long shaft that is 2mm dia. from the RB5 rear shocks. It should fit fine.

All times are GMT. The time now is 10:34 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page