Novak Brushless gearing for 501x

[Belsten]

Hi can anyone give me a rough starting point for gearing with a 5.5L in my 501X please ?

[Sensory Overload]

Was using 16/96 on an Orion/Peak 5.5 (16/87 on a big outdoor track) - no problems

[BushyAR15]

I run a 17t with the stock spur on the standard spur for the non-worlds, 96T I think....

I run a GTB w/5.5r

[501X Driver]

I am running a GTB and a 4.5L with a 19/87 on dirt off-road track is tight and 120' x 65'. Speedo after 5 min. = 120 and motor is 130.
Been running it for 3 months. Tried a 17 and temp went up to 160 on both maybe a little more on the motor.

[SiR_Dave]

Originally Posted by Belsten

Hi can anyone give me a rough starting point for gearing with a 5.5L in my 501X please ?

Standard Kit( non-big pulley ) 96/19
Worlds Kit ( or Big Pulley ) 91/16

This is set up for a track that is 100 x 50 ft roughly with the 5.5L motor.. Just try to keep the overall final in the low to upper 11ish range and go up or down one tooth depending on the track size

[Belsten]

Great stuff thanks for all your replies guys