|
#1
|
||||
|
||||
![]()
Hello,
Bought a lot of gear this year. Got to let go some of it as I want to focus on 2wd and build me a new Vega for 2012. Here is my SX3 (sold as a roller), bought in July. Really like this car, a lot more than my previous one (410) but I didn't run it as much as I wanted and as I like to keep my cars in pristine condition, a ball diffed 4wd is overkill for me. I figure I got better run as much as possible and practice a lot with one perfectly build car rather than bring several. The car only ran on astro, something like 10 sessions, one or two lipo each, not more, only practice, no race. All carbon parts (even the small ones) have been sanded and cyano coated several times. Belts sides glued too for strength and reliability. Belts tensions and diffs settings have been dealt with a team driver from the start. The main chassis is more or less full option with : - Optionnal turnbuckles - Alloy diffs excentrics - alloy steering - 7.5 alloy front rakes - FAB system - Alloy lower shocks cups - 1 deg alloy rear hubs - Answer RC KO alloy servo horn - Alloy suspension mounts could be lift off from the SX and M4 front-front ones are included (SX was M3) ![]() ![]() ![]() ![]() ![]() ![]() Along with this chassis, I've got some spares and unused parts (one bag including spares FAB slipping pads to be added) ![]() Lots of tyres, glued well and balanced with Answer RC inserts including up to bottom, left to right : - 1 set of Yel Spikes (I mean minispikes for all of them) rather used 30% left. - 1 set of Yel Pins 40% left. - 2 front pairs of Pins 20 to 40% left. - 1 front pair cut stagger ( ![]() - 1 front pair Yel spikes two outer raws cuts, not run - 2 sets of Yel Spikes 60% left - 1 set of pins 60-70% left - 2 sets of Yel Spikes one not run, the other one run. - 1 front pair Ballistic Green, not run - 2 front pairs of yel Spikes, not run - 6 pairs of rear wheels. - 1 full set of Yel Spikes tyres (rear is old package one) Most have their outer raw cut off. I add six pairs of schum front 4wd inserts. ![]() And one complete SX/SX2 to build, for spares or to sale with several chassis, top plates and shells. ![]() SX3 include two Kifo carbon wings and a rather used black one. I've got a Custom Blitz shell somewhere but couldn't find it today. I rather like to sell the whole in one sale. I ask £350 including shipping (package is in Paris,France). If interested, I could sell ESC, motor and servo for a good price (as pictured without the MRT). I may have an Orca saddle too for sale. Always got great feedback here, mostly as a buyer. Last edited by tomtom; 21-11-2011 at 07:50 PM. Reason: Sold |
Thread Tools | |
Display Modes | |
|
|