|
#1
|
||||
|
||||
![]()
X2C roller, has RW nylon idle gears fitted not long back, fully ballraced and has turnbuckles fitted, it has STD ansmann plastic shocks fitted, good overall condition (shell has a little paint missing, wing is a little split), alloy front hexes fitted and cut down axles. PLEASE NOTE that the cut staggers on the front are no longer on the buggy! instead a new pair of BB pink spikes on wheels have been put on.
Mad Monkey roller with Ansmann metal geared servo, comes completely ballraced, std shocks and has turnbuckles fitted, shell is a Phat bodies shell for a x6 good overall condition Both buggies have been run out side so please expect some scratches on the chassis! X2C/monkey spares these include white sprayed used shell, nip Monkey chassis, nip rear shock tower, 2x nip t plates, 2x nip rear arm mounts, nip motor plate Mad Rat & MM spares these include, macnum chassis 3x 80t spurs 2x ball diff main gear 4x diff out drives 2x diff rings/balls 1pr slipper pads & plates NIP steering rack/posts Pair rear drive shafts Complete set of (used) turnbuckles (also some used STD top arm bars) Hinge pins (some new some used) NIP motor plate,slipper plates, top layshaft, 2 front shock towers 2 upper plates (used) Wing mounts, servo posts and wheel hexes (some new some used) 2 castle mounts (used) Some front steering arms/ 'C' hubs (used) Set of 4 lower arms (New) Set of 4 lower hard arms (used) these are stiffer than normal rat/mm items above Bag containing wheel nuts, front axles, ball studs, few other bits n bobs (mostly new items, nuts have been used) 8 STD shock bodies and shafts (no shock bottoms or springs included!) All above parts are new but not in packets unless otherwise stated The whole lot for £150 collected from Stoke on Trent/Staffordshire area or willing to meet up somewhere ![]() If you need any more pics please PM me ![]() Last edited by 4_cell_racer; 29-10-2011 at 04:06 PM. Reason: Pics added |
Thread Tools | |
Display Modes | |
|
|