|
#1
|
||||
|
||||
![]()
This is my mid motor buggy. Its a true CR with a PSI LMX mid motor conversion and is set up for carpet. I made a custom top deck for carpet use, its double the thickness for less flex and won't break (the stock one is flexy and works good on dirt but I know of many that have busted with carpet use) I has the the bell crank steering. It also has a carbon fiber rear shock tower brace (extremely rare), mip cvd's (with the latest red rings) and lunsford titanium turnbuckles, rare trinity shock adjusters and rpm rod end. Due to the conversion (retails for around $150 to your door) I'm asking 140 pounds. I have both the 4 gear tranny ( very rare, many were defective so very few are around that are usable, maybe 1 of 25 or so)installed as well as the older cam style 4 gear system which moves the motor forward which can be good in some situations. Its a pretty good car over all, very fast.
I also have my spares. There's lots of nip spares plus a lot of out of package spares. Heres a list of most of the nip spares, theres at least as many used parts as there is new. LOSA1104 front shock tower x3 LOSA1112 front arms LOSA1122 front spindles + carriers LOSA2113 rear pivot block x2 LOSA2132 rear arms x3 LOSA3018 thrust bearing x2 LOSA4114 battery strap LOSA4122 front kickplate + bulkhead LOSA5015 shock cartrige x2 LOSA6003 foam things (yes, thats what the package says) LOSA6103 3/32" e-clips LOSA9715 carbon fiber shock tower LOSA9956 aluminum front pin brace Asking 60 pounds or 160 pounds for everything, prices are in British pounds and shipped to the UK. I cannot guarrenty the shipping time as it would be comming from Canada and it would be shipped 'small packet international surface' add an extra 15 pounds for 'small packet international air' PM me if you want a price with faster shipping. |
Thread Tools | |
Display Modes | |
|
|