|
|||||||||||||||
|
#1
|
||||
|
||||
|
Hi guys,
What are the best oil seals are best to use in the diff? And what are the part numbers for these? Cheers Oli
__________________
|
|
#2
|
|||
|
|||
|
Some people use the kyosho ones p5's i think i've been usind losi one (LOSA3505) with no leaking diffs
|
|
#3
|
||||
|
||||
|
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. ![]() |
|
#4
|
|||
|
|||
|
I use Hpi p5 and not leaked at all, cheaper to lol
|
|
#5
|
|||
|
|||
|
If you don't use the stock seals you will get more friction from the diffs. I didn't realize this till recently. Some others have mentioned it as well. Just be aware of it. Good luck.
|
|
#6
|
||||
|
||||
|
The reason i ask is that I have to take them apart after chewing the main gear on the diff. Do they need replaceing after taking them apart. The aren't leaking at present
Oli
__________________
|
|
#7
|
|||
|
|||
|
No the seals will be fine just put the seal into the new ring gear with abit of grease and refill with oil you'll be fine
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|