|
#1
|
|||
|
|||
![]()
one thing i want to resolve before sunday is the steering, where i have full lock to the left I only have about 80 - 85% steering to the right, I have the servo dead centre before fitting the horn, and wondering if the turnbuckles are wrong length on one side?
thanks. |
#2
|
||||
|
||||
![]()
well are they?
|
#3
|
|||
|
|||
![]()
seem equal to me, need to get the tape out
![]() |
#4
|
||||
|
||||
![]()
Check the steering EPA in each direction on the transmitter. It doesn't need to be set to maximum, just set so the wheels get full lock.
|
#5
|
|||
|
|||
![]()
What car is it?
Can you get some adjustment out of the turnbuckle from the servo to the steering rack if it's not your tx? |
#6
|
||||
|
||||
![]()
DEX410R afaik. no adjustment there since it's like an inch long
![]() |
#7
|
||||
|
||||
![]()
some older servos dont have as much of a range of movement, if your epa's are all at max you gcould fit a longer servo horn
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
![]() |
Thread Tools | |
Display Modes | |
|
|