Tresrey parts from the UK??

[samd]

Does anywhere in the uk sell tresrey parts?

[Andyp]

I don't think so sam I couldn't find any where, I got my body from a place in Spain , the postage was fair and delivery times were ok 3-4 days , they is a thread on here with a link to a couple of overseas dealers on here somewhere, I think the title is just tresrey

[Nick]

france Sam they have all the bling
http://www.m2d-shop.fr/

[traffman]

Purchased from m2d-shop in France 4 weeks back , some newly added bling.
Adds a touch of colour to the Durango.

[dlewis4]

Can you the stuff and have it shipped to the US?

[PositivoNegativo]

Originally Posted by dlewis4

Can you the stuff and have it shipped to the US?

PositivoNegativo also send to the US, login to view International Shipping Rates
Click here to see all products.

[paulc]

I've used postivonegativo very good service fast shipping would recommend them

Paul

[kabilay]

Originally Posted by paulc

I've used postivonegativo very good service fast shipping would recommend them

Paul

[m2d]

Originally Posted by Nick

france Sam they have all the bling
http://www.m2d-shop.fr/

thank's Nick,
I will receved in fews week all news parts of TRESREY . new shock and more.
we sell in many country too, US too ,

[Gonzo]

From the early tresrey lightweight shafts, I've seen some tear apart at the little holes of the MIP-part, only after a couple of packs. So I hope the 2 mm's are improved now, otherwise a no go: Look bling, but weaken your car.
The alu hubs are fine, only a lot of play at the front after a couple of packs, where they are connected to the hub. But I don't care about the play, works fine like this.
Gainabull-body is ok too, if you like it
Didn't try any other Tresrey parts yet.

[samd]

Originally Posted by traffman

Purchased from m2d-shop in France 4 weeks back , some newly added bling.
Adds a touch of colour to the Durango.

Bling!

[traffman]

Originally Posted by Gonzo

From the early tresrey lightweight shafts, I've seen some tear apart at the little holes of the MIP-part, only after a couple of packs. So I hope the 2 mm's are improved now, otherwise a no go: Look bling, but weaken your car.
The alu hubs are fine, only a lot of play at the front after a couple of packs, where they are connected to the hub. But I don't care about the play, works fine like this.
Gainabull-body is ok too, if you like it
Didn't try any other Tresrey parts yet.

As far as the 2mm Shaft goes i have only ran the car for around 5 or 6 races.
If they do wear quicker then i feel the look and quality outweighs the price as tbh there only about 11 quid.
I still have the original kit items .
You say the alu hubs have play in them , do you find considerably more play in the as opposed to the kit items or just a touch more ?
I do like the quality of the Tresrey parts and being red does ensure you stand out a little from the rest of the pack.

[Gonzo]

Originally Posted by traffman

If they do wear quicker then i feel the look and quality outweighs the price as tbh there only about 11 quid.
You say the alu hubs have play in them , do you find considerably more play in the as opposed to the kit items or just a touch more ?

It seems to me more than the original, it's the spot with the most play of my complete car. But on the otherhand, the bearing part is a perfect fit, and I didn't brake any outer bearings yet, front nor rear, before that lots.
I can't remember if the R version rear part has big size bearing, if not the Tresrey are surely the way to go. In front I keep on using the alu ones too, I prefer stronger with a little more play.

Glad to hear the newer shafts are better quality, because the early ones opened up at the round joint. The car I saw them fail on was using a 6.5 on very high grip astro. Which motor and surface were you running?

[traffman]

The Motors the Lrp x12 6.5 , surface is mid grip indoor track , partially canvas with polished floor so there is a fair bit more give than Astro turf.

I will keep an eye on the shaft but it seems substantial enough to withstand the track i run on indoors.

As per your post a true factor in the reliability would be to run the car on a selection of varied tracks.

I will keep you posted if theres any issues.

[LiL_JaSoN]

bling

[m2d]

I have try the new conversion shock on my car this WE, fantastic smooth !!!
on carpet track , I start with 30Wt front / 30Wt rear ( stock piston conversion )

[samd]

Originally Posted by LiL_JaSoN

bling

Real carbon chassis??

[Kaizen]

Originally Posted by m2d

I have try the new conversion shock on my car this WE, fantastic smooth !!!
on carpet track , I start with 30Wt front / 30Wt rear ( stock piston conversion )

Hi Martial,
May you please post one picture of your chassis? (full of Tresrey parts I guess
What's the size of piston holes in this conversion kit?
Thanks
Nicolas

[m2d]

in the conversion kit1.3mm-2Holes/1.4mm-2Holes/each 2pcs) for front and rear
I have using 1.3mm-2Holes in front and 1.4mm-2Holes for rear

I haven't try the servo saver part and the rear HIGH TRACTION WEIGHT ( they will be arrived in a few week now )

my car is at the left , the car right is at Gilles




thank's at Drspeed for the photos