losi parts clearout xx/xxx

[ConceptRacing]

a3063 xx motorplate x2
a4118 xxx front bumper / motor guard / body mounts x1
a3075 trans upper gear pin / idler shaft x10
a2125 xx rr hub set x3
a2937 idler gear , 32t ,shaft xx/gen2 x5
a4130 xx front bumper x4
a3073 retrofit trans outdrive cup diffhalf x3
a3097 molded front outdrive set x1
a2935 xxx gen2 outdrive set x1
a2905 monster outdrive male x3
a3079 idler gear xx-xxx (2) x15
a2128 rear hub carriers xxx/4/t x3
a3124 hydradrive slipper spring/cup/washer x6
a1120 xx front spindle/carriers x4
a4124 xxx front spindle/carrier/rear hubs x1
a3070 xx trans diff rings x7
a2155 xx rear shock tower x2
a9801 xx graphite rear arms x3
a2130 xx rear arms x2
a2925 diff gear xxx/nt x6
a1122 front spindle,carriers xxx x2
a9940 alu hard coated susp balls x1
a3049 xxx motorplate x1
a3006 diff gear x4
a8106 xx wing wire x18
a6100 e-clip .125" (small) x1
a6101 e-clip .1875 (large) x10
a6102 c-clip .1875 (large) x2
a6103 e-clip 3/32 x1
a9830 graphite pivot plate xxx-cr x1
a2110 xx rear pivot plate support #2 x4
a2120 xx rear pivot plate support #4 x4
a4105 xxx maun chassis+brace x2
a1146 xx outer front pin / king pin 3/32 x8
a2164 xx outer hinge pins rear x12
a1143 xx inner front hinge pins x3
a5008 upper shock mount bush x1
a5050 shock spacer set x1
a3072 xx trans diff tube x1
a3034 xxx transmission screw set x9
a6204 4-40 x 1/2" cap head screws x4
a6210 4-40 x 3/8" flat head screws x2
a6245 4-40 x 5/16" button head x5
a3045 slipper gear cover plugs x9
a6907 5mmx8mm bearings(xx-trans) x1
a6908 1/2"x3/4" bearings (xx-trans) x2
a6909 1/8"x3/8" bearings (xx-trans) x4
a6911 3/16"x5/16 bearings (xx-trans) x1
a6916 3/16"x3/8" bearings (xx-trans) x1
a9713 graphite kickplate, bulkhead, steerbrace 2
a2007 front inner hinge pin all xxx x1
a2161 xx inner rear hinge pin x1
a1141 xx front bulkhead set (upper and lower) x1
a2164 xx outer rear hinge pin x5
a9831 graphite composite rear pivot plate xxx x5
a2108 xxx rear pivot plate x3
a2120 xx rear pivot plate #4 x1
a2110 xx rear pivot plate #2 x1
a9830cr graphite composite rear pivot plate CR x1
a1105 xx front shock tower x2
a5023 spring clamps + cups h-arm x6
a1121 xxfront spindle+carriers 25degree x5
a1107 xxx front shock tower x1
a5022 x-long shock shaft 1.2" x3
a1615 short ball cups+threaded rod x3
a5146 2.75" spring 1.6 rate grey x1
a2938 genII trans case set+spacer x1
a1110 xx front suspension arm x2
a3078xx trans diff screws+hardware bushing kit (xx xxt) x4
a4138 alu rear hunge pin brace (xx xxt) x2
a2209 rear hinge pin support bracket (xx-4) x5
a3099 full thrust bearing set xxx x1
a3132 xx hydra drive slipper backing plate x1
a3933 76tooth 48dp spur gear (4wd) x1
a3906 86tooth 48dp hydra drive/slipper gear x1
a1610 xx steering hardware set x1
a5057 threaded plastic shock nuts (4) x1
a3001 transmission housing L+R x3
a3058 xx trans case set 2.19:1 x7


open to offers
postage 50p per item or 5 or more items £2
i accept paypal as payment via gift