|
#1
|
||||
|
||||
![]()
Nothing special, but i got kind of bored..so i took some parts that i have here in the hoby room
![]() See how low light i can get this "Thin4", no plans to race, since it is waaay to light..i hope ![]() Heaviest of the El will be the Xerun60A sensor and Novak 380 - 8.5T Rest will be mini servo Hardcase CS 1900lipo can handle 114A burst.. I will use Orion 26mm lightweight El touring rims, with dito rally/pin from schumi ![]() ![]() |
#2
|
||||
|
||||
![]()
you'll need quite the mini servo, I'd think a low pro servo would be much better, even though you don't plan on racing it, you'll still want it to steer
|
#3
|
||||
|
||||
![]()
now you should try to mount a durango body on this!
__________________
Jon Gagnon TLR 22 |
#7
|
||||
|
||||
![]()
Done...little sad...the weight is exactly 1101gr rtr...with Schumi tires it will losse some more...im running the Limited Edition CM26 motor insted..the novak felt great but i will not roast it
![]() ![]() |
#8
|
||||
|
||||
![]()
4th and almost final lid for the Thin4 car...sad i rushed this one, and the heat did some small damage on the lid, a new one will be ready sunday..
![]() |
#9
|
|||
|
|||
![]()
Looks good. How well does it get round a track tho?
|
#11
|
||||
|
||||
![]()
hey MR.P
Looks Like fun . if your going to put a 1/10th motor . maybe a one cell lipo could do the trick . ie : 4200mAh 3.7V Carbon LiPo battery, for 1/12-scale cars ![]()
__________________
...THE UNTOUCHABLES... |
#12
|
||||
|
||||
![]()
Car looks ace
![]() Will first test be at "green hill" ??
__________________
TRF 511 TRF201X TLR22 Futaba 4PL GMBK Norway |
#13
|
|||
|
|||
![]() Quote:
Tried this myself, and using a 1 cell lipo with a 3.5t motor gives reasonable power in a car on the weight limit, but imo isn't worth the trouble. If you go this route you need a receiver pack. - The 1/12 style regulators don't give enough oomph. But the main drawback is the amount of time to charge as the lower voltage means you take a lot more out of the pack than with 2s. You can't get away with one battery unless you are running at a very large meeting. A 2s micro pack like the one pictured in the car, or low capacity full size 2s pack such as orions 2400 which only weighs 150g is a better option. But it will depend on your local rules as to what you can do. |
#14
|
||||
|
||||
![]()
First test will be at GreenHill...i will order some 2200 45c packs...i will not run the 1/10th system in this...it was never made for it...but it can be done, i have done it...it looks good
![]() |
#15
|
||||
|
||||
![]()
Looking good thomas
![]()
__________________
Jonathan | Atomic-Carbon |
#16
|
|||
|
|||
![]()
Awesome Thomas
![]() How about 4wd front tyres on the back to loose a little more weight ? and for motor, how about using something like Dan has in his Chunk, its 400 size so can use stock 48dp pinions too ![]() or maybe shorten the chassis, change the wishbones and call it a Micro !! |
#17
|
|||
|
|||
![]()
nice input wayne.
i can tell you will be a valued member of this forum. |
#18
|
||||
|
||||
![]() Quote:
![]() 4wd rears..thats a plan. The motor, yes, now i have to look in to that, i know that Feigao have a real nice 380c cklass, with inbuilt zink in the can..that can to be a killa |
#20
|
|||
|
|||
![]()
Hello
I´m very interested in your project! But can you tell us how long the runtime ist with that lipo? thanks a lot! Simon |
![]() |
Thread Tools | |
Display Modes | |
|
|