Xx4 slipper

[Rob_B]

Just ran my xx4, and after around three mins of racing the slipper undoes itself? Anyone no what it could be? Thanks

[pugboy]

rebuild it, and be very careful to get all the washers in the right sequence, and the correct way around, then all should be well. and make sure you don't run it too tight or you may break belts.

[Rob_B]

Gutted, Just spent this morning rebuilding it and installing all my electrics. Thanks. Do you think in could be the nut at the end of the shaft? mite try replacing this first.

[lochness42]

Originally Posted by Rob_B

Gutted, Just spent this morning rebuilding it and installing all my electrics. Thanks. Do you think in could be the nut at the end of the shaft? mite try replacing this first.

Yes that can be source of failure and I would check that in first place.