New Weights from RudeBits

[RudeTony]

Hi all
Lots of new parts have been developed for the CR2 and more on the way!!
Have a look at www.rudebits.co.uk for all the info

You can also email me at either [email protected] or [email protected]
I don't often check here so email is always better
Regards to all

[Lee Martin]

good work!!!!!!!!!!!!!!!!!!!!!

[MatJohnson]

Looks good, now all I need is pay day to get here

[GRIFF55]

Looking guuuuuuuud that Tony!! cracking place to put some weight

[OldTimer]

Originally Posted by GRIFF55

cracking place to put some weight

Thats the idea

[KinWild]

Thinking of getting a CR2, just to get that bitsNice work

[RudeTony]

Lee Martin TQed by winning every round of the Proline 2 day challenge using the new RudeBits weights for the CR2.

Lee also drove awesome in the 8 minute final to also take the win.....if anyone was there, I am sure they will back up the statement of actually how good his car looked.....

[carlin]

Hi Guys,

I cannot remember if i asked this before.

What weights are most ppl using on the car from Rude Bits.

I was looking at the motor plate & some weight under the servo that was it really.

But what is peoples thoughts

[Danny McGee]

Originally Posted by carlin

Hi Guys,

I cannot remember if i asked this before.

What weights are most ppl using on the car from Rude Bits.

I was looking at the motor plate & some weight under the servo that was it really.

But what is peoples thoughts

I'm using the Battery Straps, the rear brace, the fron side weights. Thats to start then i move into the weights under the servo and the sidepod weights.

i also have a brass bulkhead but they dont do those yet

Danny

[V-Rossi]

Originally Posted by carlin

What weights are most ppl using on the car from Rude Bits.

But what is peoples thoughts

Just the brass T-plate, good stuff.

[nitrokillah]

Hey tony .

Please check your mail .

Got an order for you from Freud .

THX

[freud]

Yess Tony Please i need those parts
Iss Urgent thx

[RudeTony]

Originally Posted by freud

Yess Tony Please i need those parts
Iss Urgent thx

Your invoice has been sent to you 2 days ago. (no reply)
An email has been sent to you as well (no reply)
There is NO phone number, so I cannot ring you.
I do not have an address either so I can't even get on a flight and personally deliver to you !!!!!
I have checked the spam twice over - the personal mail through the door - the post man was held at gun point and so on but communication is a 2 way scenario and as harsh as this sounds I cannot do any more from my side to communicate - What else would you like me to do?

[nitrokillah]

Ahhhah .
My bad . for some reason it was in my spam/Junk folder .

THX .

Rudebits are always on top of things

[freud]

Originally Posted by nitrokillah

Ahhhah .
My bad . for some reason it was in my spam/Junk folder .

THX .

Originally Posted by nitrokillah

Rudebits are always on top of things

Thx you for all Tony

[RudeTony]

Ah ha!!
Received and posted - it may take a few days to arrive to Belgium but in the post.
All the best
Tony E

[nitrokillah]

Good stuff .
will be waittin' for it ...

[flipside]

Originally Posted by RudeTony

Hi all
Lots of new parts have been developed for the CR2 and more on the way!!
Have a look at www.rudebits.co.uk for all the info

You can also email me at either [email protected] or [email protected]
I don't often check here so email is always better
Regards to all

Hi,

This under-motor-weight-piece has been out now for a while, I wonder if many people like it, or are you still putting loads of weight in the front too)?

When I first started this experiment with rear weight, I found it to be a massive improvement (http://www.oople.com/forums/showthread.php?t=37939)

Just wondering if this plate changed your setups or not.

I have driven the car on slippery surfaces also, and didn't need to resolve to exotic setups to create more rear end grip or traction. Still need to go to a real slippery outdoor dirt track, but with this weight I don't expect any problems.

I'm also not running a super heavy car (+-1600gr).

So, what are your experiences weight wise with the CR2, esp regarding the brass rear brace?

[RudeTony]

Originally Posted by flipside

Hi,

This under-motor-weight-piece has been out now for a while, I wonder if many people like it, or are you still putting loads of weight in the front too)?

Hi

Every Team Driver is using the T-Piece to great success.
All the best for now
Tony E

[flipside]

hey Tony, I didn't say out of stock :-)

I ment that the piece has been available for a while now, and wanted to ask peoples experiences. I'm a teamdriver as well, in fact I started to use this piece (see other thread I linked to).

So this was just an enquiry to hear about people's positive (or negative) epxperiences :-)