|
#1
|
|||
|
|||
![]()
Going to be putting rudebits under speedo also so just wondering if there will be enough clearance for the SXX TC or whether it will have to be a SXX Comp?
SORRY FOR ALL THE QUESTIONS BUT I'M A X6 VIRGIN..... and we all love them ![]() |
#2
|
||||
|
||||
![]()
With the speedo in the center of the X-6^2 speedo clearance should be an issue.I run a Phatbodies Zen shell and it clears perfectly on a Sphere tcBattery clearance is the only issue> I run big 6000mah lipos(left over from a 1/8th conversion) and the shell fits great.A recomendation is to check the trim lines as they go down the side of the chassis I trimed about 3mm lower down than the cut line just to be sure and it fits great.
__________________
If 4 out of 5 people "suffer" from diarrhea, does that mean 1 out of 5 enjoys it? |
#3
|
||||
|
||||
![]()
Speedo in the middle of the car and you'll have no trouble fitting a Vaykal on
![]() |
#4
|
|||
|
|||
![]()
Knew you'd know just don't like to PM you ALL the time just MOST of the time
![]() |
#5
|
||||
|
||||
![]()
SXX TC comes without mounted fan - you have to do it on your own. I don't run fan even in TC mod with lipo and 6.5T motor so I belive you'll be safe also without fan at all. Anyway - esc in the middle clears shell without problems even with fan.
__________________
Retired from racing
| パベルともうします、よろしくおねがいしますスロバキア人だ、今イギリスにすんでいます。| | Ralls Racing | RCSGraphicWorx - paints, paintjobs, decals, custom wear | Schumacher Racing | Mr.O inserts | |
![]() |
Thread Tools | |
Display Modes | |
|
|