how to solder corally connecters...

[dr durga]

hi guys, could someone send me a link, or explain to me how so solder corally connecters... cant find anything

[chris_dono]

fill the end with solder, then put the wire in/on

[sosidge]

I assume you are talking about soldering the tubes onto the cells? Because soldering the plugs onto the wires is pretty straightforward.

First thing you need is a powerful iron with a big tip. 60W+ makes it a lot easier.

Second thing to do is to tin the cell and the tube.

Third thing to do is to hold the tinned areas together (long nose pliers and a battery jig is a good combo) and apply the iron to the tube until the two tinned areas flow together for a nice strong joint.

It is a little easier to assemble, and fits into some cars better, if you use L-shaped bars on the cells - like these...



http://www.muchmoreracing.com/store/...roducts_id=557

Or, if you don't want to solder any corally tubes, try these...



http://www.muchmoreracing.com/store/...oducts_id=2561

[dr durga]

wow, thats really simple! thanks (oh by the way im getting trakpowers which have them integrated (i think thats what i know of...) but thanks anyways

[dr durga]

would these work? http://www.muchmoreracing.com/store/...f4fc303b938987 meh just wondering.... if there weak ill solder... i dont mind

[discostu]

i wouldnt bother with them just solder them

[dr durga]

ok cool