|
#1
|
|||
|
|||
![]()
ive nearly finished building my new b4 ft. In the instructions it tells you to use the number 2 pistons for the front and then number 1 pistons for the rear. It clearly shows you should have four number 2's and two number 1's included in the kit on one white sprue. Ive only got a smaller white sprue in my kit which has four number 1 pistons on it, and thats it.
![]() Is this only what is icluded nowadays or have i been unlucky and got shafted? |
#2
|
||||
|
||||
![]()
My recently bought kit was the same...
![]() |
#3
|
|||
|
|||
![]()
thanks for quick reply. Are these number 1 pistons no good then? What does everyone use?
|
#4
|
||||
|
||||
![]()
you should have 4 number 3s 4 number 2s and 4 number 1s dude
if you dont-- ya got linched lol Ring CML and tell them whas in the kit- they will help out no probs just one thing - what car was on the box Craggy or the blue one? i bought a blue kit no so long ago and my manual said to run 1s all round
__________________
Team Associated- HobbyWing- Reedy- CML |
#5
|
|||
|
|||
![]()
it was cragg on the front. Theres no mention in the manual of all the other pistons you listed. Should they be in the box? (i mean for free)
|
#6
|
||||
|
||||
![]() Quote:
they also dont list the other anti squat shims- but you should have a 1 and a 2 of them. most people run number 1 rear silver spring 30w oil and number 2 front blue spring 30w oil
__________________
Team Associated- HobbyWing- Reedy- CML |
#7
|
|||
|
|||
![]()
cheers milzy. Ive got the 1 + 2 shims and it came with front brown springs and black rears. Arent the front blue ones a bit too firm? (not much steering)
|
#8
|
||||
|
||||
![]() Quote:
Blue fronts are what every one runs in the uk only change to silver if you need more grip and green on the rear for the same
__________________
Team Associated- HobbyWing- Reedy- CML |
#9
|
|||
|
|||
![]()
It seems the FT kits do now only come with a set of pistons (1's I believe), the full set now has to be purchased seperate AFAIK. We have had this in every FT B4 kit for a while now, so dont think it is an error more a "cut back" maybe
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#10
|
||||
|
||||
![]()
i had the same thing and also one of the turnbuckles was not right,i rang CML and they sent me a full set of pistons and turnbuckles............................oh happy days
|
#11
|
||||
|
||||
![]()
ok i really hope thats not right - giving as the manual is telling you to run 1s and 2s in the ft kit
__________________
Team Associated- HobbyWing- Reedy- CML |
#12
|
|||
|
|||
![]()
As said above CML have dished out (so far at least) a free set to everyone who has had them missing, but we have had them out of EVERY kit from the last two batches now, surely too many to be a coincidence???
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#13
|
||||
|
||||
![]()
Glad CML are sorting people out- but if there not in the kits then maybe an amendment needs to be made to the manual
__________________
Team Associated- HobbyWing- Reedy- CML |
#14
|
|||
|
|||
![]()
many thanks to jez who is sending me some out FOC. Cheers buddy. Will buy from this guy again
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|