|
#1
|
||||
|
||||
![]()
Another 501 post im afraid,
![]() When I order my car, i might as well order the spares that are most likely to break. What are the most common parts that i might need? I think id prob order the 1 way spool, the upgraded screw kit and also the shock shafts, but anything else to consider?? From what i understand, the hobby company dont really carry spares for the car and its a few week wait for spares to be delivered etc. How are you finding the durability of the car? - is there anything else i should consider? Thanks Col. |
#2
|
||||
|
||||
![]()
Bit of a hard one this, as I have not broken anything, but this is what I went for:
Item No Description Quantity Rqd 51274 x2 51273 x3 51272 x2 51275 x2 51276 x2 51277 x2 51279 x2 51285 x2 51278 x2 A Parts 9004176 B Parts 51271 Damper Stay Front 4304075 Damper Stay Rear 4304076 78mm swing shaft 9804297 64mm Swing Shaft 9804298 Spur Gear 51284 (x2) 45.4mm Piston Rod 9804293 (x2) 36.5mm Piston Rod 9804292 (x2) Reinforced Adjuster 51283 (x2) King Pin 9804312 (x2) I did go a bit daft but I do have at least one of everything |
#3
|
||||
|
||||
![]()
That's pretty much what I purchased too, although I also haven't broken anything (yet!). The car seems very robust.
TRF_Tastic: Did Champ have to get the hinge pins and piston rods on special order? Thanks.
__________________
|
#4
|
||||
|
||||
![]()
Dunc, they had them in stock, although in the end, I am using the yoke ones for the BX.
|
#5
|
||||
|
||||
![]()
I got 2 car sets of pretty much all the plastic parts, 3 spur gears and 3 drive belts, and a set of steering knuckle king pins. So far the only things I've broken are a front upright and steering knuckle (and lost a king pin...)
![]() ![]() -Steve
__________________
Name: Steve Description: Hairy Past: Schumacker Fireblade Evo Present: Tamiya DF-03 Future: Tamiya TRF501X |
![]() |
Thread Tools | |
Display Modes | |
|
|