connectors, DF-02, TT-01, power supply and much more

[Chris Harte]

DF-02 Plasma Edge
3 racing shocks and springs fitted to rear, springs only on front with stock shocks.
TT-01 spur gear fitted to improve acceleration.
Chassis - battery tray sanded and cut back to accommodate larger cells.
Shell itself is left clear and stickered on the outside so you can whats going on inside.
It has only seen two test runs lasting five minutes each so the bumpers are a little scratched on the bottom as you can expect.
Tyres are the ones that come in the kit - fitted with soft foams in the back and medium in the middle.
Sold as a roller without electrics but a hitec standard servo is included. £60 posted









TT-01
This has been ball raced and used outside so bottom is scratched as you expect.
Recently had new tyres fitted and oil shocks fitted too.
Comes with two six cell GP3300's cells which have plenty of life left in them.
No shelll included and if you intend to race will need an alluminium prop shaft.
No electrics supplied either. £50 posted




Team magic hex drivers


Black handle with replacable tips comes in sizes
1/16”,

.050,

3/32”
& 1/16”

£14.00 posted for all four
Plenty of life them in them. None rounded off.


Team associated hex drivers


Multi coloured handles. A few scratches here and there. All hex heads in good condition.
Comes in the following sizes
1.5mm
2.5mm
3.0mm
5/64”
3/32”
.050”
£20.00 posted for all of them.

Battery connectors


8x fake 3mm bannana plugs.
9x fake 3mm female corrally plugs. (longer then corrallies)
¾ metre of battery tidy cable
60cm of heatshrink x1 black x1 red.


£5.00 posted.


Pinions


64pitch


Robinson racing products 23tooth gold pinion Robinson racing products 22tooth alluminium pro pinion


All sealed in packet £2.00 posted per pinion. 50P discount for multibuy.


Spares


1x left rear wishbone for T4 (grapphite) £2.50 posted
1x right rear wishbone for T4 (graphite) £2.50 posted
Both new but not packaged.
1x right 25 degree steering block (plastic) for T4 £1.00 posted
1x left steering block (no degree marking, plastic) for T4 £1.00 posted
1x left steering block (no degree marking, grapphite) for T4 £1.00 posted
3x grapphite wishbone holder (screws into bulkhead) for T4 £1.00 each
1x steering rack for T4 (5 parts not sure if its complete, graphite) £2.00 posted.
2x used T4 proline ribbed front tyres fitted onto stock rims. Atleast 2 race meets left in them before they need to be changed £5.00 posted. Does not come with bearings.

Job lot of spares £9.00 posted or £12.00 with tyres


2X silver springs to fit the front of a DF-02 front £1.00 posted.
2x red yeah racing springs to fit rear of DF-02 £1.00 posted.
1x half used diff grease made by Muchmore racing (Mr) £1.00 posted.
2x resin parts of TT-01 diffs. Enough to make two diffs if you have the metal insides. £2.50 posted.
1x set of plastic bushings for DF-02. £3.00 posted.
½ bottle of blue factor oderless tyre additivie for top grip carpet. £2.00 posted.
Job lot together for £8.00 posted


Cell equaliser


Muchmore 1-6 individual autocut discharger. It is bipolar and has 5 leds to monitor discharge status.
Maximum 3a dishcharge rate. Has HB purple colour on back.
Comes with its own little flight case and looks brand new

£12 posted.






Connectors


1x 3pint to 2pin extender plug to female deans £2.00 posted.
1x female deans to glow plug charger (50p shape head with stick on end) £1.50 posted.
1x croc clips to female deans £1.50 posted
1x female battery connectors (red rx bit) to female deans £1.50 posted.




£5.00 for all connectors

To sell everything together I would be looking for £250.00 plus £10.00 postage.
Collection would be welcome for all items.


Thanks for reading.


Chris

[crayon]

Hi m8 i`ll take the
Venom power battery jig and
1x futaba transmitter charger end to croc clips
Also m8 can i have more info on the temp sense that plugs into a 3pin slot
Can you pm me with paypal details and price?
Thanks Jamie

[Chris Harte]

Hi the temp sensor is a little small magnet that has three wires running off it. Red black and white. the connector at the other end looks like the thing you plug into a RX. I think it designed to be used with a charger of some kind.

Pm'd you with price and addy.

Chris

[Chris Harte]

New pictures added to the list and prices updated to reflect what has sold.

Chris

[Chris Harte]

Anyone interest before they go for time on the bay?

Chris

[jasonnjane]

pm'd about associated hex drivers..