|
#1
|
|||
|
|||
![]()
Hi all just need a bit of advice I have a pair of 1 degree alloy rear hubs .
What effect will they have on the buggy compaired to kit hubs ? Cheers |
#2
|
||||
|
||||
![]() Quote:
Fitted regularly they will add +1 degree of toe-in to the rear, giving +4 degrees total toe-in. This will generally increase rear traction and is desirable on low traction racing surfaces. Fitted in reverse, swapping L for R, they will give -1 degree of rear toe, so taking a standard 3 degree car to 2 degrees. Using a combination of the hanger inserts and the rear hubs, you have a far wider range of toe-in options available than with the kit or 0 degree alloy hubs.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
![]() |
Thread Tools | |
Display Modes | |
|
|