xxx4 graphite help needed

[lofti]

hi every one . am new to rc racing and have just bought a xxx4 graphite with no electrics , could any body out there give me any advise on what batteries,servos,esc,and motor to put in that will get me started. am looking to race indoors mainly but may go out side not sure yet.

[Oscar]

Just about anything will fit the XXX4 radio wise, but I'd either fit a servo saver or quality metal geared servo as it has no in built servo save system as on some other models. The batteries, you may have to dremmel out slightly the battery slots and retaining bar if you wish to fit 3700's and above, anything over 3300 seemed too wide from memory.
If your new to RC, maybe start with a 19t motor and 3300 cells, which would be more than adequate for indoors. Outdoors you might want something a little faster in a 4wd, and with that would come the possible need for higher capacity cells also.
Hope that helps

[lofti]

thanks mate could you tell me also does your club still run indoor buggies if so do you no when and times cheers

[Oscar]

All details on the website. www.batleybuggyclub.co.uk there is a meeting today