Gearing for xb4

[Lee24h]

What gearing is a good base for xb4 high grip indoors with a 5.5 and slight amount of boost
Cheers

[OneKiwi]

Have you had a search?

http://www.oople.com/forums/showthre...hlight=gearing

http://www.oople.com/forums/showthre...hlight=gearing

http://www.petitrc.com/setup/xray/Se...tsXrayXB4.html

[leebunker]

19/81

[andys]

On mine indoors / big track I run kit spur with 23/24 pinion on an 6.5 Orion Vortex.

Orion motors are quite soft and a bit tame, so maybe run a tooth or two lower with faster motors of the same wind - LRP X20 for example.

I tried a 5.5 Vampire this weekend (as I run the Vampire ESC) and by mistake I put the 24 pinion on instead of a 20. I was ballistic but thermaled at around 4mins!

[OneKiwi]

Yep those vampire motors are animals, I love mine outdoors.

Im running 84/22 with orion 6T no boost/timing I also have a fan in front of the motor. Ran a whole pack and came off at @ 40°
I think it helps with temps going up to the 84