|
||
|
 |
|
||||||||||||||||||
|
#1
03-09-2008
|
||||
|
||||
Lipo S4
Well it all fits just need some battery strap now
 sorry about the poor quality photos
__________________
WWW.SERVOSHOP.CO.UK 
|
|
#2
03-09-2008
|
||||
|
||||
|
Looks cool to me will the speedo mount on the small piece of carbon fibre behind the spur gear?
A
__________________
Ashley Williams I always thought by 2013 we would have flying cars, but we have got blankets with sleeves!
|
|
#3
03-09-2008
|
||||
|
||||
|
O yes & fits behind the front screen in the shell!
__________________
WWW.SERVOSHOP.CO.UK
|
|
#5
03-09-2008
|
||||
|
||||
|
is it prepped for worksop by any chance
|
|
#7
03-09-2008
|
||||
|
||||
|
Quote:
might be!
__________________
WWW.SERVOSHOP.CO.UK
|
|
#8
03-09-2008
|
||||
|
||||
|
[quote=OldTimer;156142]Are there any bits of my car leftover
 quote]  Not much is just a pile of bits at the min! 
__________________
WWW.SERVOSHOP.CO.UK
|
|
#9
03-09-2008
|
||||
|
||||
|
you ready for s4lipo 2 over the winter m8
__________________
AC S4-LRP SPHERE TC-KO2123-NOVAK 5.5L B4FT-NOSRAM EVO-KO2123-SPASHETT 10x2 http://s343.photobucket.com/albums/o...-rugby-new.gif
|
|
#10
03-09-2008
|
||||
|
||||
|
If it all works ok Ill see what I can do
__________________
WWW.SERVOSHOP.CO.UK
|
|
#11
04-09-2008
|
||||
|
||||
|
I went an ordered Maxamps because of the Trakpower dimensions listed on their website. After seeing the above, I managed to find someone with Trakpower saddles and measured them. They are not 47mm as stated on the website, they are a nanometer above 45mm. Which....is the exact distance you need to squeeze the above in with a B44 shaft.
I would rather not change the whole drive section to a B44. It's not so much cost, but I haven't had any problems with a BJ4 one, and if I am really honest - downright laziness. Does anyone have any bright ideas on extending the "thinner" B44 drive to save switching the whole drive shaft assembly to a B44 one? or....Maybe know someone that will make a bespoke one, perhaps extend the cups somehow? For us lazy people, we would spend about £30-£40 just to save on the hassle
|
|
#13
04-09-2008
|
||||
|
||||
|
Looks ACE...Hmm, maybe i have to order a new S4 car
..and CNC off the bat slot on that one ..i do have aBJ4WE just on my table
|
|
#14
04-09-2008
|
||||
|
||||
|
New shafts are an option im sure mip could make some although I have someone else in mind to
ultamitly I want to use the B44 slipper unit & get some new prop shafts made! I just wanted to make sure it all works first!
__________________
WWW.SERVOSHOP.CO.UK
|
|
#15
04-09-2008
|
||||
|
||||
|
Ben, mine works fine just waiting for the lipo's to get here and i will get them fitted.
The B44 slipper works well, and if need be i could get that fitted for you as mine only took me 2 or 3 hours. Paul.
__________________
Team External, With only the outside chance! East Anglian ramp construction guru... ...Wiggles
|
|
#17
05-09-2008
|
||||
|
||||
|
yes mate ill be there
__________________
WWW.SERVOSHOP.CO.UK
|
|
#18
05-10-2008
|
||||
|
||||
|
What are the Part Numbers for this mod?
http://www.m-k-racing.com/product_in...oducts_id=5034 Would this be all i would need?
__________________
|
|
#19
05-10-2008
|
||||
|
||||
|
Anyone ?
__________________
|
|
#20
05-10-2008
|
||||
|
||||
|
Sorted
 
__________________
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Atomic Carbon
Linear Mode
