3mm hinge pins

[Northy]

What cars use steel 3mm wishbone hinge pins? And are east to get hold of?

Cheers,

G

[Oscar]

Have you got any broken hex wrenches? I cut some down after breaking the tip. Worked a treat and they are hardened steel so dont bend easily
Possibly drill blanks would be ideal too??

[Northy]

Jimmy had suggested that, but I thought they might be so hard that they would be brittle?

G

[stegger]

G , associated TC5 inner hinge pins are 3mm part no as31221

[Northy]

Oooooohhhh, any idea what length they are?

G

[scotoap]

Tamiya do a range of them from about 20mm to I think 48mm long in 2mm increments.
Look in the EvoIV/V, TRF414/415/416 or TA04/5 spares lists M8.
PM me if you want a specific size and I'll get the part numbers for you.

[Northy]

Well, some 501X front inner ones would be the ideal length, but where to get them from quickly?

G

[dave g]

graham..if i recall,the xray xb8 and tq models use 3mm outer hinge pins on the hubs,not sure on the length tho..good thing is mirage should have em.

[dave g]

also the losi 8 uses 3mm hingepins in the rear outer hubs dont they?
http://cgi.ebay.co.uk/Team-Losi-8igh...QQcmdZViewItem


what about these from a yokomo..they will be 3mm wont they?
http://cgi.ebay.co.uk/YOKOMO-MR-4TC-...ayphotohosting

[stegger]

Originally Posted by Northy

Oooooohhhh, any idea what length they are?

G

Not sure fella, will try and find out for you

[stegger]

Much-more racing do them aswell G, but it still doesn't say the length
http://www.muchmoreracing.com/store/...oducts_id=2554

[dave g]

http://www.brockmodels.com/product_i...8ae04648afd615
48.5mm long and instock

[peetbee]

Originally Posted by Northy

Well, some 501X front inner ones would be the ideal length, but where to get them from quickly?

G

The DB01 pins should be the same size as that, may be more readily available than the 501 parts?

[scotoap]

Originally Posted by Northy

Well, some 501X front inner ones would be the ideal length, but where to get them from quickly?

G

Brock Models M8