|
||
|
 |
|
||||||||||||||||||
|
#1
09-07-2012
|
||||
|
||||
Reventon R problems
Last weekend my day at the GP was ruined because of an electrical problem.
After a 2min run the esc goes in safe mode like the lipo is flat although there is only 300mah out of the lipo. Motor was only 35°C and the esc not even 20°C. After changing the receiver, lipo's, new wires etc.. I found out that this esc is not compatible with an LRP X20 motor?? Today I put the esc in my 2wd with a Speed passion motor and everything is 100% fine. Any advice on this issue? Thanks
__________________
Yokomo B-Max2 V2 MR Kyosho DB2 LRP Flow, Orion R10, Orion VST2, Speed Passion, Speed Power, B-Fast, Much More CTX, LRP X 20, 
|
|
#2
09-07-2012
|
||||
|
||||
|
Im having the same issue but with a sp 6.5t!
Ive been told to try a power cap so thats my next step.
__________________
"When the green flags drops, the bulls**t stops" Trader Feedback Cougar SV2 Supastox Mardave Team Associated Speed Passion, Speed Power, Core RC
|
|
#4
09-07-2012
|
||||
|
||||
|
I have no idea what the reason is. It was with trial and error that i found out that this esc didn't work with the lrp x20 motor.
__________________
Yokomo B-Max2 V2 MR Kyosho DB2 LRP Flow, Orion R10, Orion VST2, Speed Passion, Speed Power, B-Fast, Much More CTX, LRP X 20,
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
