Joo's paint!

[eyeayen]

Originally Posted by Steveonamission

Killer headlights! Niiicee

Yeah couldn't have said it better myself.

And the one above this quote, superb, really high quality !

[andys]

Fantastic - that last tourer looks amazing - 2 more to do the same too !
That's a lot of paint, and a lot of work !

[julianb]

Cheers guys, all comments much appreciated. Just been trying to up the game a bit with the last few shells, and come up with a few little tweaks of my own, the bloodshot headlights being an example.

Must be working because the queue is getting longer!

Any thoughts on a good detail brush guys? Been looking at the Iwata Kustom series, but feck!, they're not cheap are they!!!


cheers

Joo

[eyeayen]

Iwata are utterly brilliant mate, I bought my HP-B a long time ago, infact I think my Dad bought it for my 14th birthday so 24 years ago, I've not to buy a new nozzle ( cos I dropped it out the window cleaning it and despite searching the garden for 4 hours it didn't turn up, new needle cos I dropped it without the air cap on it and had it services one to replace the air valve after running it on the airline at college and getting a lot of metal filings in it So my advice to you is get an Iwata, pay out now, worry about it never again !

[U1timate PigDog]

Iwata all the way as Ian says

I have hp-cs come .3 needle as standard and is awesome!!!!!

the kustoms do look good as well, I think Mike Parker uses one??

[julianb]

Cheer's, that's what I thought. As I said, my Iwata Eclipse SBS is a proper swiss army knife. I painted most of the large F15 jet with it, and do all my shells with it also. I've been through two needles and nozzles in approx 5 years of use, on both occasions damage due to hamfistedness beeing the cause.

There are times however, when I crave better atomisation and much finer, narrower fades. I think I might treat myself to one of the Kustom range

cheers

Joo

[julianb]

Just finished a Durango buggy for fellow Louth racer Simon Babb. Inspired by one of LarryG's colourschemes, it wasn't until I compared the two that I realised I'd missed the silver pinstriping. Bugger!!!

Ah well, a few decals will busy it up...

[jonmiller]

oh well, next time mate

[julianb]

Two more for Rich Drury, cab forward for his 511 and RB5 Vega...

[julianb]

Just finished this one for a Louth racer, returning to the fold. Simple blue and white design, hope you like it dude!

cheers


Ju

[julianb]

Second of a batch of three Marcus Vassmar inspired shells (well, I say inspired - they're a blatant copy! - if it ain't broke....)

Don't know if I can summon the energy to do the third. I love the design, but jeeeesus, it's a lot of work. 2 hours to draw up and cut the mask, then five hours to paint.

Still, the recipient loves 'em!

cheers

J

[julianb]

New LTCR for my nephew, inspired by a Franks Body shell we bought and thrashed yonks ago...

[eyeayen]

Very crisp mate, that black fogging around the edges is super neat too. Nice work

[julianb]

Cheers Dude, looks much better in the flesh. The Orange is just nuclear powered!!!

[eyeayen]

AH yes nuclear powers present all sorts of problems to photograph. Outside in daylight seems to achieve the best results from my own tests but it's not easy to get any of it right.

I don't know what camera you're using but I can do this on my point and shoot and also my camera phone. Set the white balance, it makes a great difference to photo's. You might have to go through a few settings to get the correct one but the colours will come out better. And doing on a brighter background like some white card or paper or even a white sheet will help.

[julianb]

I ingratiated myself upon my niece, who had a Canon 550D. but as you say, the white balance wasn't quite right, and the dining room table under 60w bulbs isn't an ideal studio..!

Looking to buy a Nikon D7000. It was a toss up between that or a Canon 5D. I preferred the latest Nikon lenses. So Nikon it shall be! The thick end of 2k for the body and latest AF zoom lens, but I do a lot of RC aircraft photography, and the occasional kit review so hopefully over time it will pay or itself...


cheers

J

[eyeayen]

Ah, if you've got an DSLR then it's much easier. Use custom white balance. Shoot again a white background, put shell in place, focus manually, remove shell, take photo of white background, set custom white balance and use the white photo you've just taken to do it, the camera will sort it out and make it better but indoors will still cause a colour difference.

D7000 is a really nice camera, my mate has one I've borrowed a few time, cracking piece of kit. You need good lenses to bring out it's full potential though.

However I noticed you put about the Canon 5D which is full frame compared to the D7000 crop sensor, Nikon have just bought out a lower priced full frame camera, the D600, looks a great bit of kit, priced at 2k body only though, much cheaper than a 5D though ! Or get a used 5D mkII, cheaper now the MkIII have come out.

Anyway, good painting as always sir, keep it up !

[julianb]

Cheers for the informed info re:camera, as always bud!

Here's a couple more I sorted this morning for a new oople acquaintance who bought a touring car shell off me a week or two ago.

Thought I'd have a play with the dotty fade - not quite as easy as it would seem, as I found! Difficult to get the transition to solid without getting overpray beyond the dotty mask, wish I'd added pink to the front lozenge, just forgot it - no biggie, and too late to go back. Scraping off the white to re-do will just make more mess.

Ah well, thats what stickers are for!!!!

Hope he likes them. Not perfect, but tidy...

I find these smaller (1/10) buggy shells very diffficult to work with, just no room to work...

[eyeayen]

They look nice mate, dotty fade works well !

[Steveonamission]

Looking clean and smart Julian =]