Electric Install Pics

[Garry Driffill]

haha I couldnt resist it

[marco NL]

Here is my durango with speed passion GT PRO

[fmo]

The SpeedPassion is quite a demanding task to squeeze into the Durango. I am also in the middle of fitting it on the chassis, hopefully finished tonight.

How does your shell fit on the capacitor? Seems to be to high...

[marco NL]

the body is a little to high
See my pictures on show me your durango

I try a different lrp Power Capacitor
I do not know if it works

Originally Posted by fmo

The SpeedPassion is quite a demanding task to squeeze into the Durango. I am also in the middle of fitting it on the chassis, hopefully finished tonight.

How does your shell fit on the capacitor? Seems to be to high...

[AK19E]

Here you can see my Durango with the electric components.





AK19E

[offroadrc]

hey Marco, looks great, watch your axles cause they will get you trouble, loctite etc.

[freud]

My Durango DEX410
Speedo:LRP SXX TC SPEC (Set up Speedo:1.3.2.2)
Motor:LRP X12 OCTA WIND 6.5 (Spur/pinion:87/22)
Lipo: LRP Saddle 4800 40C
Receiver: Micro Spektrum
Servo:Futaba Low Profile S9551

[Takes2home]

I freud, nice color your bodyshell, ist a normal spray can or airbrush? Whats the name of the pink-magenta color?
Thank you
F

[freud]

I takes2home
I dont know is mikovic painted my bodyshell

I will ask him

[MIKOVIC]

hi takes to home..
the color is the fluorescent violet by faskolor but with a little bit Fluorescent pink ..

best regards

MIKO

[AmiSMB]

Here is my Hobbywing XERUN 120A squeezed into the Durango. In the past I have tried to keep the motor wires underneath the drive shaft but I decided that I would go over the top as it makes it easier when soldering non V3 motors. Longer motor wires but it works and they do not get in the way and they do not touch the sensor wire which other have found to cause problems.

[Takes2home]

Thank you for the info mikovic, i like the coloration

[fastinfastout]

Originally Posted by AmiSMB

Here is my Hobbywing XERUN 120A squeezed into the Durango. In the past I have tried to keep the motor wires underneath the drive shaft but I decided that I would go over the top as it makes it easier when soldering non V3 motors. Longer motor wires but it works and they do not get in the way and they do not touch the sensor wire which other have found to cause problems.

didnt know motor wires can cause problems near the sensor wire.

what problems did people have?

[AmiSMB]

Originally Posted by fastinfastout

didnt know motor wires can cause problems near the sensor wire.

what problems did people have?

There was someone on this forum that said they had problems when the motor wires were near the sensor wire. I have never had this problem myself but also did not want an issue like this so just went with wires over the top.

[bustabo]

here are some recent pics of my electric installs

[raymondkerr]

my recent install of LRP electrics, but might soon be changing to Speed Passion, so that maybe a harder challenge to fit.

I notice the newer Intellect 5000 Lipos in the previous post, am I correct in saying that the 5000s are the maximum intellect cells that will fit in the DEX410. I know Intellect have 5300s out, but I have been told they are too tall to fit.



My PT sits vertically to the left of the speedo switch beside the cells.

[Foppa]

Heres mine, it wasn't easy to fit a SpeedPassion GT with a Futaba receiver but I found some pics on Tresrey staff blog and those guys seem to like that combo so I had a little help

[Bungleaio]

Here's my install, I could do with a smaller reciever but it provides a good mounting position for the fan.

[Northy]

Here's my Tekin Install Sorry about the poor picture, looks a bit tidier in the flesh! I'm currently taking the Speedo RX lead in and out a fair bit to play with my new speedo

[samd]

Nice fitting that fan in