New 2wd madrat

[budgio]

I may well have to try schuey balls (eek sounds ghey)
Cant find them anywhere

[DCM]

I would think that they are an imperial size, but being a European brand, they are a metric measurement, think 3/32 would fit, which is 2.38mm

[JBL]

The stock madrat looks a good piece of kit. You would only need some bearings for it and half decent shocks. For the money a great starter kit for somebody entering the sport. Are the bearings metric or imperial?

Perhaps Ansmann could sponsor its own championship in the future using there own models? Tamiya used to do this around the Cambridgeshire border areas in the late 80's (I am that old!). It was organised by the late Orton Models in Peterborough.

[budgio]

I think the bearings must have been withdrawn from the kit at the last minute (to keep price low)
in my build manual it says i should have them but they are brass
the sizes are:

5x8x2.5 2 of
10x15x4 2 of
5x10x4 12 of

The steering is ballraced though

[DCM]

diff balls for you

http://www.rc-direct.co.uk/kyosho-3-...ls-p-2159.html

[budgio]

nice one

[stox217]

A Question for jamie (Ansmann)
When will there be a ballraced upgrade for the madrat?

[JJ The Boat Wizzard]

Most shops stock cheap 'good' bearings anyway for like a quid 'ish' each so just do that insted of waiting for a upgrade set

[RichB]

Originally Posted by JJ The Boat Wizzard

Most shops stock cheap 'good' bearings anyway for like a quid 'ish' each so just do that insted of waiting for a upgrade set

...or somewhere like http://www.rcbearings.co.uk/, they are even listing kits for Ansmann cars as well

[Jamie.T]

You could also buy the x-pro bearing set as an upgrade for the mad rat.

Or option 2 is just buy some bearings from your local model shop.

Sizes needed are:

5x8x2.5mm
10x15x4mm
5x10x4mm
3x6x2.5mm

Jamie....

[mdb_75]

I'm thinking or getting a mad rat as at the price they seem great value!

Can someone that's got one please measure the extended length of the shock absorbers? I ask as Ansmann do alloy shocks for around £9.50 a pair that come in 55, 75, 85 and 95mm lengths.

Ta!

[Spoolio]

Originally Posted by thomj316

You could also buy the x-pro bearing set as an upgrade for the mad rat.

How much?

Originally Posted by thomj316

Or option 2 is just buy some bearings from your local model shop.

Sizes needed are:

5x8x2.5mm
10x15x4mm
5x10x4mm
3x6x2.5mm

Jamie....

How many of each are required?

Cheers

[RogerM]

Originally Posted by budgio

Any tips on how to find three 2.37MM diff balls ??
Could be anywhere ....probably China

That will be 3/32", should be easy enough to find

[mdb_75]

Well I've gone and ordered two Madrats, one to run and one for spares

Got the bearings coming from Rc Bearings too

[stox217]

mine's on the way

[DCM]

those who got the madrat, are the wishbones and chassis made out of stiff plastic?

[stox217]

il tell you when its arrived or unless some one beat's me to it

[bigred5765]

One madrat shell, a la jez,

[Jez]

Originally Posted by bigred5765

One madrat shell, a la jez,

holy smoke carl,i aint aint gunna lose that at end of straight pile up!!!!!i just hope it looks even better in the flesh.you done wing as well???ive gone all giddy.cant wait to spank it round rhr on sunday.will hopefully have spare car tomorrow,but just in case is anyone taking one with them???many thanks jez.

[Garry Driffill]

Jez, Can i get a kit through you mate?