Lazer zxr

[rondoolaa]

Originally Posted by isobarik

Ron

The upperdeck and the brace are from fiberlyte.

http://www.fibre-lyte.co.uk/

mvh isobarik

thankyou

[oli4ke]

Originally Posted by isobarik

oli have you bought the kit for the lazer zxr ????
What was missing.
mvh Isobarik

Yes I did buddy, Some washers, nuts and screws were missing!
Basicly the kit is not complete as they say on their website.....

[isobarik]

Originally Posted by oli4ke

Yes I did buddy, Some washers, nuts and screws were missing!
Basicly the kit is not complete as they say on there website.....

I think i can live with that but would have been good if they where full but hey the different versions of the lazer dont use the same amount of screws.

mvh isobarik

[oli4ke]

Originally Posted by isobarik

I think i can live with that but would have been good if they where full but hey the different versions of the lazer dont use the same amount of screws.

mvh isobarik

On the end the kit did the job do....

[isobarik]

Originally Posted by oli4ke

On the end the kit did the job do....

They are all hex heads ???
any pix ???
mvh Isobarik

[oli4ke]

Originally Posted by isobarik

They are all hex heads ???
any pix ???
mvh Isobarik

Not all screws are hex! Most of them....
I will add some pics from the car and screws tonight!

[oli4ke]

Enclosed some pix Henrik, if you need more just let me know mate!!

[isobarik]

Looks nice and the long gearbox screws are there and so are the big upperdeck screws looking good shall order asap.

mvh Isobarik

[Ema]

Originally Posted by oli4ke

Enclosed some pix Henrik, if you need more just let me know mate!!

Rpm ball cups, associated ball studs, gold alum nuts ..... sounds familiar !!!
Great job mate !!!!

Bye
Ema

[oli4ke]

Originally Posted by isobarik

Looks nice and the long gearbox screws are there and so are the big upperdeck screws looking good shall order asap.

mvh Isobarik

The long screws were missing first I claimed this and they have send them without any problems.
Please note I did't used the standard long screws from the kit, I ordered other ones on ebay (see link) the original screws are also hex but "flat headed"

http://cgi.benl.ebay.be/M3-x-45-STAI...item4aa1db31de

I guess you need 3 of those for the ZX-RR or 2 for the ZX-R, if you want them please PM me your address and QTY needed and I will ship them to you free of charge!

[oli4ke]

Originally Posted by Ema

Rpm ball cups, associated ball studs, gold alum nuts ..... sounds familiar !!!
Great job mate !!!!

Bye
Ema

LOL EMA BUT the RPM ball cups are a different color then yours aren't they
Thanks buddy!!!!!!!!!!!!

[rondoolaa]

Originally Posted by isobarik

Found the right composite craft sheet so will make an matching upper deck.

Otherwise look at this nice looking alu stuff in the front/rear

http://cgi.ebay.co.uk/Kyosho-Lazer-z...item19c50f63aa

mvh Isobarik

[Welshy40]

You guys crack me up. I used the blue rpm ball cups with associated ball joints in the 90s plus used silver stainless stell screw sets as they dont bend or snap easily unlike the rest. Also allen key screws preferably all one size as this aided in quick maintenance. Im going to post some pics this weekend.

[isobarik]

Originally Posted by rondoolaa

Did you win ???? looked good.

mvh isobarik

[rondoolaa]

Originally Posted by isobarik

Did you win ???? looked good.

mvh isobarik

i did,




omg, did you see the price the tub chassis went for, i put a bid in, not knowing what it was worth and it quadrupled my bid easily, lol

http://cgi.ebay.co.uk/300551907559?r...#ht_500wt_1156

[isobarik]

Well got some parts yesterday and builded a bit to day some parts are still missing but they are on its way.

Fitted the VZW-010 these are alu hexes with an rubber o-ring to hold the pin in place before these came i used the LAW-30.
The vzw-010 are an straight fit and needs no shiming prefer these over the LAW-30. Front driveshafts are LA232 65.5mm. Front using LA219.04



Since th VZW-010 came in a st of 4 i also mounted those in the rears.
Drive shaft in the rear are UM510.01 62.5 bones with LA231.02 axles
Rear hub is SP107H



Here is an over view so whats missing then front turnbuckles for steering and i have not mounted the shocks since i im missing some shock bushing for the LOSi shocks that i have decided to use. I have bought some Trinity shockbushings in alu so they are on theire way. Will replace the ball at the shock end with some kyosho dito due to the losi one is a bit to big and its easy to replace it. i have also mounted the good looking spidey battery bars that are shorter and fit the chassi.



hope you like it

mvh isobarik

[isobarik]

Originally Posted by rondoolaa

i did,




omg, did you see the price the tub chassis went for, i put a bid in, not knowing what it was worth and it quadrupled my bid easily, lol

http://cgi.ebay.co.uk/300551907559?r...#ht_500wt_1156

Damn those tubs are sexy.......

mvh Isobarik

[isobarik]

Welsh
can you email me the zxs manual. its something wrong with mine.

Never mind found an backup.

mvh Isobarik

[Welshy40]

Iso will do when i get a chance tomorrow.

Re tub chassi, gutted i didnt copy right it as they made a lot, still there is still only one with cell holes in the world that was designed by me and still searching for it. Best chassi i ever had. Im going to have a new one made by fibre and based on the original and still the best design.

Zxs looking good, unsure why your using losi shocks when they didnt come on the evo.

[rondoolaa]

Originally Posted by isobarik

Did you win ???? looked good.

mvh isobarik

just thought i'd post pics of what i got..