|
||
|
 |
|
||||||||||||||||||
|
#101
15-12-2010
|
|||
|
|||
Super Noel - great to see that you are providing one-stop shopping with the DMS graphite tower, Cream Extreme mounts and screws. – much easier!!!
Noël, Noël, Noël, Noël. . . . . Born is the King etc, etc, . . . .
__________________
Tony Mulligan DESC410R, DEX410, DEX210, Cream Extreme (the dog's b******s) www.srcc.co.uk 
|
|
#102
16-12-2010
|
|||
|
|||
|
X6
Cream
Are you at bury this weekend cos wouldn't mind seeing what you have for the X6, front bits for tower, motor mount, e spped hangers what you got J
|
|
#103
16-12-2010
|
|||
|
|||
|
Quote:
I'm not m8, I'm only doing front bulkheads (B4,X6), rear bulkhead(B4) and the mounts(B4,X6) at the moment. Just recived a few carbon fibre shocktowers of DMS today. So once I've finished the mounts which I'm currently on with, I'll post them up for sale, with or without the tower. 1st kit has already been pre-ordered by a USA team driver  I've done a couple of other little projects for people on here, But if they want people to know about them I'm sure they will post them up  Thought about rear hangers, but there are already a couple of people making them, which kind of cuts the market share down.
|
|
#104
20-12-2010
|
|||
|
|||
|
Next batch of mount are ready..
I also have a limited number of DMS shock towers to go with them.  Mount as before £11 shocktower £18.39 I am planning on supplying screws as well, but Mr postman doesn't want to deliver them. They will be £1 for a set of 4. Postage as per first post in this thread..
|
|
#105
20-12-2010
|
|||
|
|||
|
Noel - I think I may have your next project. I'll PM you on the SRCC website.
__________________
Tony Mulligan DESC410R, DEX410, DEX210, Cream Extreme (the dog's b******s) www.srcc.co.uk
|
|
#109
26-03-2011
|
||||
|
||||
|
Nice upgrade to the old B4, cheers Noel. Love the finish on the mounts, they really are top notch!
__________________
For everyone I've confused: Aka Stu
|
|
#113
20-09-2011
|
|||
|
|||
|
So here it is..
  Little difference at first appearance? First thing you might note is the lack of a pin. Reason being it's not needed and was a legacy of the K-factory mount these are based on. My biggest concern when I started making these was to make something that didn't fail. To finish first, first you need to finish, and if your steering goes AWOL because of a stripped thread I've fail. Stainless steel was my first choice as far as strength was concerned. There where lots of mumbling about them being to heavy, But after being put into production most if not all found that unfounded. But, and it's a big but people where still concerned about putting 14g at the front of the car. That's where these come in, Made from an aerospace grade of Aluminium not only are they light at 4.6g They also have a very high tensile strength, which makes the thread very strong. That along with the tapping method nearly has them rivaling steel in strength. Certainly strong enough to snap your stud before stripping the thread. The price is the same as before at £11.00 I hope to within the next couple of days also have a new product that is being released by DMS, Which they are calling Flex-carbon. A carbon fibre blend which has all the positives of carbon but with a little more give which reduces breakages. I'll let Darren fill in all the details about that product, but I know he's very excited about it. Little video for what it's worth  
Last edited by Cream; 21-09-2011 at 03:26 PM. Reason: weight corrected.
|
|
#114
21-09-2011
|
||||
|
||||
|
Nice new part, cool vid.
|
|
#115
21-09-2011
|
||||
|
||||
|
New parts!
Hi Noel ,
I'm back to you to ask : what about doing this part (stainless steel)??? http://www.redrc.net/wp-content/uplo...goWeight-1.jpg How much would it cost?? With the new V3 I think you "should" have a Durango hopup parts line in your extremly creamy bits collection! Also , I have a 210 pre ordered at Lazy , if ever you need some dimensions or something else , do not hesitate to ask! Have a nice day! red. (thanks for the link @ RC4Ever!)
|
|
#116
21-09-2011
|
|||
|
|||
|
So annoyed. Missed Mr postman today so no tower to show you till tomorrow.
Just to fill everyone in, DMS will be announcing a new shock tower probably next week now as I've just pinched all his stock . Same design as the carbon tower but made from a product they are calling Flex-carbon. Combining all the strength of carbon fibre but with a little flex to reduce impact breakages. Best bit. It's cheaper Costing just £14.69. Both Darren and myself will be doing the two products together for £24.99 Hope to have pic's up tomorrow. Unless Darren has some already for you to have a look at?
|
|
#117
22-09-2011
|
|||
|
|||
|
Yay picked up my DMS towers today.
The all new Flex-carbon. Part No DMS173  Here they are all mounted up  and a nice little side shot to show this isn't just a laminate.  Mounts £11.00 Tower £14.69 If bought together £24.99
|
 |
| Thread Tools | |
| Display Modes | |
|
|
X-Factory
Linear Mode
