M3 screws seperate

[DaveG28]

How many are making the M4 mod? Tempted to just stack up on M3's from Nortech!

[Northy]

Originally Posted by Swiss

If this is the case usrely it would be better to bend an M3 screw than snap a w/bone hanger?

I've seen one animal snap them while using M3 screws, so I'm not sure M4 is a great idea TBH.

G

[PaulUpton]

yep ive broke a few wishbones using the original M3 screws!

[Chrislong]

Originally Posted by Northy

I've seen one animal snap them while using M3 screws, so I'm not sure M4 is a great idea TBH.

G

I broke a wishbone hanger - the rearmost one, not the 10deg block. But I did hit a car flat out on the straight - the list of broken parts was long (but Wishbone survived!), and im still finding things twisted now after I thought id fixed it.

[Northy]

Originally Posted by Chrislong

I broke a wishbone hanger - the rearmost one, not the 10deg block. But I did hit a car flat out on the straight - the list of broken parts was long (but Wishbone survived!), and im still finding things twisted now after I thought id fixed it.

Make that two animals then......

G

[ben]

3 animals Ive done a couple of the rear hangers with the M3 screws.
I did the same thing as chris and hit a car flat out on the straight, the broken parts mounted up... but no broken wishbones that was with medium flex btw.

[Northy]

You were animal no.1

G

[Oliv996]

Here is a solution to avoid bending front screws:



It requires to mod front bumper

[ice-nine]

Nice job on that. Hopefully, Schumacher or someone produces that, as well as a bumper, as a kit, certainly addresses the problem!

[stegger]

Originally Posted by ice-nine

Nice job on that. Hopefully, Schumacher or someone produces that, as well as a bumper, as a kit, certainly addresses the problem!

It's in hand i should have one by the end of the week and then depending on interest i will get some costings because i have somebody too produce them

[ben]

We had a brace identical to that on the 24 hour endurance car