Newcastle R.C. Racers @ TyneMet

[lazysurfer]

Originally Posted by furball85

i have purchased a touring car off one of the members that sold up couple months ago was wondering what gearing/motors you guys are using as already have mini pins both yellow and green, i have also purchased a durango 410r buggy and just wondering what gearing/motors your using as i know their usually higher turn will pop along next monday to have a look and a chat.

Not sure on gearing people use - motors are 13.5 or 10.5 brushless on TC's anything you like on buggies.

Hopefully see you next week - bring a car with you

[furball85]

i aint going to bring the car has santa is supposed to be nice and bring me eletrics what motor would you recommend for buggys to start with as never done them before

[nobby]

Originally Posted by furball85

i aint going to bring the car has santa is supposed to be nice and bring me eletrics what motor would you recommend for buggys to start with as never done them before

6.5 should be more than enough for 4wd.

[furball85]

okay but the only thing i need help on is a basic gearing to start with.

[nobby]

Pop along on Monday and we will try and help.

[furball85]

yea i am coming along i will bring car just wont be racing, as not got all the esc etc yet least that way i can get it looked over by someone who knows what they are doing lol and i can have a chat with some of you

[lazysurfer]

Originally Posted by furball85

yea i am coming along i will bring car just wont be racing, as not got all the esc etc yet least that way i can get it looked over by someone who knows what they are doing lol and i can have a chat with some of you

Cool. C u Monday

[slipdigby]

Originally Posted by lazysurfer

Sad to hear that Luke is selling up after a bad week last week according to Steve. A bad week is no reason to give up, I’ve had about 2 months now since my car has been even drivable (Clarky spotted a problem with it last night so hopefully better next week) so get yourself back next week Luke and give it another go.
If not there’s an almost new B44 full setup with radio, li-po’s & charger ready to run up for grabs for anyone interested or anyone just starting out.


Cheers

If Lukes on here dont give up on a bad week or two, get along this Monday for a race. Im going and im usually one of the back markers for the fast buggy lads. Maybe a bit of competition at the back of the field?

[lazysurfer]

Ok lads just a reminder albeit a bit on the late side that racing is on 17th December but that we miss xmas eve and new years eve then are back on the 7th Jan - well you lot are, I'll be throwing myself down a mountain on a tea tray
And the week after will be the AGM at which point your subs become due and you need to find a new chairman (and it won't be me again) so everyone along to that meeting to have your say.
I'll probably post a report on tonights meet if I remember but a bit busy this week so just in case I forget - all the best for xmas and new year

[AfroP]

Originally Posted by nobby

6.5 should be more than enough for 4wd.

I think for just starting out a 6.5 may be too much in a 4wd
i'd suggest a 10.5 or 8.5

[lazysurfer]

Ok a late report on this week, mainly down to me being off work and being too lazy to do it on my phone.
And because it’s late I cant remember how many were racing, 17 I think, 2 buggy heats of 4 & 5 and a busy TC heat of 8………….or something like that with Hindson running both since he’s not going to be able to make it back for a long while.
Good turn out for the week before xmas J
Only 2 finals with all the buggies in one due to there being very little difference in pace over the full field - suggested by a buggy driver before any of you on the dark site accuse me of favouritism!!!
Nice to have Paul Ferris make another return from being AWOL along with Campbell with a “P” tho Gary didn’t race but promises to come back.
A visit from Greg Natalie & Barry must mean universities have broken up for xmas and a possible new racer for next year in Ryan coming to watch - hope to see him back and on the track soon.
Unusual absentee was Steve Allan, hope you haven’t decided to join Luke on the ex-racers list L

[richie.]

Hi is this the RC club that used to be called Riverside Racers based at Longbenton? I'm possibly looking to climb into the loft and dust down my cars in the hope of fixing them up for use once again.....

[FastWheels]

Originally Posted by richie.

Hi is this the RC club that used to be called Riverside Racers based at Longbenton? I'm possibly looking to climb into the loft and dust down my cars in the hope of fixing them up for use once again.....

That's right Richie, the very same club.

Touring Cars & Buggies.

[richie.]

good stuff I used to go there with my dad back in the 90's on a friday night! Is there a section on here displaying venues, dates and times so I can pop along for a look?

[FastWheels]

The first post in this thread should give you the info you require.

[richie.]

Thanks got that! Ive just sent off for a replacement front U shaft for the seemingly near impossible to find parts for Academy STR-4 Pro I have. So hopefully Ill get it repaired and bring it along! I also have my dads old Laser ZXR in a similar predicament

[richie.]

So Ive got the academy working having fitted a new front axle...... may drop by on the 7th and see what I need as most of my batteries have had it. hoping someone may glance at my kit and bring me upto date on what I need to get going again?

found these when I dragged my equipment down from the loft, ring any bells with you? mid 90's is my best guess lol!

[lazysurfer]

Bit of history there. Sure someone will give you an update on 7th. AGM on 14th don't forget everyone. My last duties a chairman :-)

[Ray Mac]

Hi Richie, sorry your name rings no bells with me, I'll probably remember you when I see you on the 7th. I was at the Longhorsley meeting, along with Gary Armstrong who was flying with the aero club up there.
We are both still members of this club and welcome any previous old members back into the oldest RCC club in the area.
Looking forward to next Monday, see you then.

Ray Macaulay. Ray Mac.

[lazysurfer]

Originally Posted by Ray Mac

Hi Richie, sorry your name rings no bells with me, I'll probably remember you when I see you on the 7th. I was at the Longhorsley meeting, along with Gary Armstrong who was flying with the aero club up there.
We are both still members of this club and welcome any previous old members back into the oldest RCC club in the area.
Looking forward to next Monday, see you then.

Ray Macaulay. Ray Mac.

By the oldest RCC driver in the area ;-)