|
#641
|
||||
|
||||
![]()
try with none at first, and if you run good in the infield, use the Turbo only, if it lacks a little in the infield, add some boost too.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#642
|
||||
|
||||
![]()
Is the hotwire iPhone app still in testing or has it been canned now?
__________________
Lets Off Road! |
#643
|
||||
|
||||
![]()
I haven't heard anything as yet.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#644
|
||||
|
||||
![]()
Just to let you guys know, we now have RS pros and RS speedos back in stock after the last batch sold out very quickly.
We've also had a few enquiries about Hotwires; these are on their way and should be here early next week. We also have a range of motors and accessroies in stock. if anyone needs anything at the EPR national this weekend come and find me. ![]() Cheers Kev |
#645
|
||||
|
||||
![]()
I'm looking for a RS setup for 2wd buggy's from a UK driver, all the setups on the website are pretty american with pussymotors.
I'm still running 1year old firmware at the moment and planning to update it this weekend before the Oople race. (SP v3 7.5 motor) Thanks !
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. |
#646
|
||||
|
||||
![]()
Hi Cooper,
I Have a setup for my 2wd with a 6.5 and I've used the same setup for 7.5 dual mode BS 100% (then limit if needed on transmitter) DB 10% NW 8 TP 4 MT 1 LM 90% Timing 80% I gear my 6.5 on 24/78 (x6) and would go 2 pinions higher for a 7.5 Good luck ![]() Kev |
#647
|
||||
|
||||
![]()
Any Tekin Team drivers going to the oOple Invernational?
![]() G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#649
|
||||
|
||||
![]() Quote:
Thanks Kev, I hope I can translate al those letters to actual meaning words when I put a setupsheet or the software next to it. edit: found it, thanks: what with al that boost and turbo thingies? just put them out I guess ![]()
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. |
#650
|
||||
|
||||
![]()
Those functions are only active in sensored mode, make sure you are in dual mode. I think you'll only need to go to the advanced area to check or change your software version. I'm running V203... i forgot to mention that before.
|
#651
|
||||
|
||||
![]()
All Tekin users should download and closely read this :
http://rcfaq.weebly.com/uploads/1/6/...v200_vegas.doc ![]()
__________________
Schumacher KF | K1 Aero | RWS RZ6R |MiniZ MR-03 | Orion R10 esc | LRP motors | Orion 90c lipos Rusti Design - Awesome custom stickers and cool stuff My trader feedback |
#652
|
||||
|
||||
![]()
my RS can't find the 'brake' when setting it up..
what could be the problem? tried the trim already
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. |
#653
|
||||
|
||||
![]()
Have you tried servo reversing the throttle? Some makes of speedo expect it only one way round.
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#654
|
||||
|
||||
![]()
Ensure your EPA is at 100% and that you haven't got your brake turned down on your radio....
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#655
|
||||
|
||||
![]()
If you're using a Futaba radio you must reverse the throttle channle. Also make very sure your abs is off for calibration.
__________________
Tekin Team Manager |
#656
|
|||
|
|||
![]()
do 27mhz work ok on the rx8 sytem and does it work with spektrum dx2 and acoms 2.4ghz cheers
|
#657
|
||||
|
||||
![]()
Yes it should work fine with any typical surface radio system.
__________________
Tekin Team Manager |
#658
|
||||
|
||||
![]()
it's the schumacher 'code' and it's on neutral for the moment, I have ATL (don't have a clue what it is) on 50%, it was like that after reset.
all the other stuff is on 100%. will try reverse and ATL :-)
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. Last edited by Cooper; 30-06-2010 at 01:53 PM. |
#659
|
||||
|
||||
![]()
fixed, why do they call it ATL, it's BRAKE
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. |
#660
|
||||
|
||||
![]()
ATL- Adjustable Thottle Limit lol.... glad it's sorted!!
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
![]() |
Thread Tools | |
Display Modes | |
|
|