Lazer zxr

[Welshy40]

Moth,

I would also suggest buying from fibrelyte the zx steering plate as it stops bumpsteer (its the straight one compared to the angled ends on the ZXR) when connected to the blue steering arms.

Longer Ujs for the front so you can use the other hole in the castor blocks, as this gives the car more control and more stability as the front is wider the rear follows.

[isobarik]

Originally Posted by moth898

I take back that lesbian thing... those platinum blond swedish chicks are pretty hot.

I just got those diffs for the lazer, they're not the same as the originals I hope they work. they got that winged nut welshy was looking for.

I've decided to go ahead with a lazer zx-r racer. I'm convinced it will be stronger than what is out there right now. I'm going to use that stiffer chassis I found and I'm going to switch to fiberlyte shock stays. Any other suggestions?

moth we can make a trade you can take the blonds in the swedish hockey team and trade them for the canadien skipper Cheryll Bernard damn she is hot every time she slides a cross the ice down low i fanatsise that she is crawling up in my bed from .....damn i have to go and ...hm do stuff...
And i would like to comfort her since they lost the finals to who was it again ?? cant seam to remember who was they lost to moth ?? any ideas.

mvh isobarik

[moth898]

They lost to Sweden, just like Sweden lost to Slovakia annd Slovakia lost to Canada and so on and so on..........

I'll send you a Canada jersey after we win the gold so you can be part of the winning team too

[isobarik]

Originally Posted by moth898

They lost to Sweden, just like Sweden lost to Slovakia annd Slovakia lost to Canada and so on and so on..........

I'll send you a Canada jersey after we win the gold so you can be part of the winning team too

yeah that felt bad loosing to slovakia but they played better then sweden and scored more goals and if you dont score more goals then the other team you will loose.

And the best thing is that even if wouldnt take a singel medall you would still be my B****....ha ha ha

Funny thing do you know how many people there live in sweden ???

mvh Isobarik

[moth898]

Originally Posted by isobarik

yeah that felt bad loosing to slovakia but they played better then sweden and scored more goals and if you dont score more goals then the other team you will loose.

And the best thing is that even if wouldnt take a singel medall you would still be my B****....ha ha ha

Funny thing do you know how many people there live in sweden ???

mvh Isobarik

So now we calculate ratio's of metal's to population...did you see that Canada has the most gold metals...that's never happened, the gouvernment actually funded the athelets these past four years. In the past our olympians payed for most of their training with little help from Canada.

On an other note, I just bought a lot of lazer parts to finish my racer. What should I use as electronics...stick or saddle. What size motor..brushed or brushless

[adam lancia]

You're partly right moth, the Own the Podium Program is the funding you're talking about. It seems to have helped a good deal!

[isobarik]

Of course the canada government wanted a good olympics with alot of medals usually is that home team makes more medals then other olympics it was like that in china and lillehammer.

mvh isoarik

[Welshy40]

Saddles balance the car better so would advise that. I would recommend you guys telling me the distance between the rear battery post to the front battery post in MM so i can see if my Lipo tray i designed will be a direct fit. Also i need the distance from the front post from left to right, all measurements from the centre of the screw hole. If yes then you can buy Lipo saddle packs no more than the vampire 4400 as any bigger they wont go under the top deck.

Motor i would advise a 6.5 and liked the Losi as it was cheap. Otherwise get an lrp x12 but to use this properly you will need the lrp sxxtc esc. If too pricey losi do a package deal with motor and esc but the esc is not always reliable. The tekin rs pro esc is what i used to use and never failed me at all.

Ratio, well you PM me what you have bought and i will give you a starting point. You need the motor to come off after a five min race at a hand warm temperature, quite the opposite to brushed motors where they come off really.

Hope this helps.

[isobarik]

I just have the MKII to take measurment from for now and that is not right since the MKII are a bit of ....ca do it in the moring dough on an ZX chassi

mvh Isobarik

any one that has seen a composite craft top deck for the ZX/R ???

[Welshy40]

Ive had a white grp version, a black kyosho version, a wasp and a few others but the kyosho design is actually the best one.

[knmtrip3]

Originally Posted by Welshy40

Moth,

I would also suggest buying from fibrelyte the zx steering plate as it stops bumpsteer (its the straight one compared to the angled ends on the ZXR) when connected to the blue steering arms.

Longer Ujs for the front so you can use the other hole in the castor blocks, as this gives the car more control and more stability as the front is wider the rear follows.

Can anyone tell me what the part code is for the caster blocks with 2 holes are??
thanks Karl

[isobarik]

Originally Posted by Welshy40

Ive had a white grp version, a black kyosho version, a wasp and a few others but the kyosho design is actually the best one.

yeah but i bought an zxr from us and i sold the topdeck since it was not compositecraft. I would like to have an topdeck that looks like the lower deck and the steering .thats why im looking for an compositecraft since i know it look like the parts that is on the car.

welsh I bought the battery bars for the lazer zxs from fiberlyte but i would like to have that squared type that can be seen on the zxs on ebay do you know which i mean ??
Do you now if they ( fibrelyte ) have found the mold for the tub chassi for the zxr

moth
us 0 - can 1
and 40 mins to go but the last periods stats for canada is not impressive.

mvh isobarik

[isobarik]

Originally Posted by karlmark1

Can anyone tell me what the part code is for the caster blocks with 2 holes are??
thanks Karl

LA-59

mvh Isobarik

[isobarik]

Moth

Us 1- can 2
and 20 min to go
if this holds it looks like that you have to send that jersey....

24 seconds to go an 2 - 2 seams you have to hold that jersey...

mvh Isobarik

[moth898]

Its not over yetand you will wear that shirt

[moth898]

I think you'll look sharp in red and white iso

[isobarik]

Congratulation to the gold medal looking forward to that red and white jersey,,


mvh isobarik

[Welshy40]

Originally Posted by karlmark1

Can anyone tell me what the part code is for the caster blocks with 2 holes are??
thanks Karl

The front hubs you already have do have two holes. Take the pin out of the wishbone and the hub will come out. You should notice another hole thats hidden when attached to the wishbone and thats the one to use with the longer driveshafts.

[Welshy40]

Originally Posted by isobarik

yeah but i bought an zxr from us and i sold the topdeck since it was not compositecraft. I would like to have an topdeck that looks like the lower deck and the steering .thats why im looking for an compositecraft since i know it look like the parts that is on the car.

welsh I bought the battery bars for the lazer zxs from fiberlyte but i would like to have that squared type that can be seen on the zxs on ebay do you know which i mean ??
Do you now if they ( fibrelyte ) have found the mold for the tub chassi for the zxr

moth
us 0 - can 1
and 40 mins to go but the last periods stats for canada is not impressive.

mvh isobarik

The tub chassis mold still hasnt been found and im gutted as it was the first one ever made.

The lipo trays, im confused are you on about the two separate trays where one is on each side or the one piece item? Put a link or picture so i know which one, cheers.

[isobarik]

Welsh i was talking about he battery straps for the zxs i have bought mine from fibre-lyte but i would like to have the ones that are on this car


Do you have these on file would like to have .

mvh isobarik