|
#41
|
||||
|
||||
![]() Quote:
![]()
__________________
|
#42
|
||||
|
||||
![]()
Well you have stated the problem perfectly there, (going off topic i know, sorry)
My car is still not competativly fast at teesside even with a much better driver than me using my car, and i have thrown more money at that car than i thought possible. I think that before you say peoples cars are to fast for them the club should maybe consider a few classes for 2wd then, because it puts newcomers off having to have the best of everything (which i do not) to have a car thats remotely competative, then to find themselfs that the car is to quick for them. Im sorry but i found that last comment fairly offensive, ok i aint the best driver, not by a long way and i probably never will be and yes i went from the B4 RTR motor (17T) to a mamba 5700, im not the only one who doesthings like that, i was just getting frustrated that i started driving alot better yet i could not keep up with anyone so i had to start throwing money at it..... Back on topic, Choose which ever one you want mate, i obviously dont have a clue.
__________________
Canon 40D (350D backup) - EF-S 18-55 - EF-S 17-85 - EF 100-300 - EF 50 - Canon 430 EX || Speedlite - Canon BG-E2N Grip Adobe Photoshop CS4 Extended AX-10 Crawler - Thats all I have left!!!
|
#43
|
||||
|
||||
![]() Quote:
__________________
|
#44
|
||||
|
||||
![]()
Ye, thats why i will be getting a legal motor soon.
__________________
Canon 40D (350D backup) - EF-S 18-55 - EF-S 17-85 - EF 100-300 - EF 50 - Canon 430 EX || Speedlite - Canon BG-E2N Grip Adobe Photoshop CS4 Extended AX-10 Crawler - Thats all I have left!!!
|
#45
|
||||
|
||||
![]()
And is that the one that you may be purchasing off of me.
![]() ![]() ![]()
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
#46
|
||||
|
||||
![]() Quote:
![]()
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
#47
|
||||
|
||||
![]()
Yea its nothing to do with how much you spend aslong as you have the right speings a nice 19tmotor a reasonable speedo and some good tyres you can be very competative. And having the quickest motor doesnt make you the fastest. Fast is slow and slow is fast.
A
__________________
Ashley Williams I always thought by 2013 we would have flying cars, but we have got blankets with sleeves! |
#48
|
||||
|
||||
![]()
Is that why everyine at teesside runs high spec brushless
![]() Legend, im sory but i odnt think i will be buying the 4.5 off you, i have other things that take up money and therefore i cannot afford it, sorry for the inconvenience i miht have caused. Ya, i know i would drive better with a slower car (and anyway, i feel that i have come along way since i have used the new FT) but i just cant stand brushed motors, sticky brushes do my nut in so im gonna stick with brushless for now, i like it ![]()
__________________
Canon 40D (350D backup) - EF-S 18-55 - EF-S 17-85 - EF 100-300 - EF 50 - Canon 430 EX || Speedlite - Canon BG-E2N Grip Adobe Photoshop CS4 Extended AX-10 Crawler - Thats all I have left!!!
|
#49
|
|||
|
|||
![]() Quote:
|
#50
|
||||
|
||||
![]()
Taht is why you go and get a 19t motor with lots of torque. and gear itr at something 27/81 and then it will easyilly keep up with a 12 turn
![]() ![]() ![]()
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
#51
|
||||
|
||||
![]()
Hehe, i wasnt going to run the mamba at first, just put a 19T on it and practice till i could handle brushless, but when i got it there was this nice shiny motor sitting right in front of me, who was i to say no?
![]()
__________________
Canon 40D (350D backup) - EF-S 18-55 - EF-S 17-85 - EF 100-300 - EF 50 - Canon 430 EX || Speedlite - Canon BG-E2N Grip Adobe Photoshop CS4 Extended AX-10 Crawler - Thats all I have left!!!
|
#52
|
||||
|
||||
![]()
Teeside is unlike any other venue I've raced at. The grip is so high that slow motors are an advantage for mortal drivers to help prevent grip roll. It's only if you're really good or have lots of experience there that a fast motor does you any good.
Josh - wise move not buying the 4.5. That's just stupid fast ![]()
__________________
|
#53
|
||||
|
||||
![]()
Josh, listen to what Gary says... wise words!! You may find it offensive but it is the truth. Put a 27t stock in and learn how to drive and how to set the car up. Even a 19t motor is too fast for a beginner like yourself, in my opinion. If you keep throwing money at it, you will just go fast in a straight(ish) line and break a lot of parts, and end up with no money (or your parents will just say no to giving you more money!). Remember, slow is fast!
Listen to Leg-end too. Simply because he is THE Legend! ![]() Back on topic (lol), I found my old Losi 2wd broke no more than my B4... but to be honest with the speed of the cars nowadays if you crash something is likely to break. At the time I had my Losi bits were more expensive than B4 parts, which I guess is a factor worth thinking about. Liam... |
#54
|
||||
|
||||
![]()
I know, I know.
Its not even a fast brusless in it now, the 5700 is apparently equivlent to a 7.5 brushless, i may consider buying a slower motor, and just to say, im not a begginer, i may of only been racing buggies since march but i aint a begginer ![]() ![]()
__________________
Canon 40D (350D backup) - EF-S 18-55 - EF-S 17-85 - EF 100-300 - EF 50 - Canon 430 EX || Speedlite - Canon BG-E2N Grip Adobe Photoshop CS4 Extended AX-10 Crawler - Thats all I have left!!!
|
#55
|
||||
|
||||
![]()
As much as we tell you though, you aren't going to change it are you? We tell you to slow down because in the end we don't want to lose a member when either you get bored of fixing it, or your parents stop paying for it all.
I don't really know what to say to the beginner comment... ![]() Liam... |
#56
|
||||
|
||||
![]() ![]() Just saying, iv been very into RC cars for years, just never raced them. I might change, i just dont like brushed motors, to much maintenance
__________________
Canon 40D (350D backup) - EF-S 18-55 - EF-S 17-85 - EF 100-300 - EF 50 - Canon 430 EX || Speedlite - Canon BG-E2N Grip Adobe Photoshop CS4 Extended AX-10 Crawler - Thats all I have left!!!
|
![]() |
Thread Tools | |
Display Modes | |
|
|