Dex410v3 RR suspension hanger

[Scotty15]

Yep they have them in got mine delivered today so I will be fitting it tomorrow.

[OneKiwi]

If I getthe rear one and its inserts what one is at the front? 0°?
I have -2 and +2 now

[Dazzler]

The -2 / +2 RF Brace remains on the V3 in conjunction with the RR inserted brace.

[OneKiwi]

OK and that goes on the front part of the rear?

I then don't need to buy the 4 for the rear then if I get the V3 with inserts right?

Ive been looking at a few setups lately and a few seem to have the 4 in the rear, I don't have that yet, so Im wondering if this will solve the problem with that and give me even more tuning options

[Dazzler]

From what I can gather, you have the -2 / +2 Rear Front. (RF) Brace, which you would use in conjunction with the insert type Rear Rear (RR) Brace.

The RR brace will be used instead of the 0, 2 & 4 degree RR braces as included in the original 410 full fat kits.

[samd]

Are the inserts the same as the old braces? 0mm 2mm and 4mm offset, or are they 1mm 2mm 3mm?

What are the available anti squat settings with the new brace?

[samd]

Anyone know??

[Scotty15]

There only three inserts in the kit marked 1 2 3 so there are only three adjustments poss

[Big G]

I think you turn them upside down also to give 5 different settings. or 6 if you want to be technical

[Scotty15]

Yep your correct Big G I forgot to say about turning them around. But looking at the hanger it could be turned upside down as it is machined flat on both sides so it can be used both ways.
I haven't tried it so I don't know if it will work upside down.

[samd]

Originally Posted by samd

Are the inserts the same as the old braces? 0mm 2mm and 4mm offset, or are they 1mm 2mm 3mm?

What are the available anti squat settings with the new brace?

Doesn't anybody know?

[Adam Skelding]

They are 1,2 and 3 degree when using -2 rear bracket.
We are doing a Team Tech Tip, showing all the possible combinations of the anti squat blocks and inserts.

[jimmy]

There are 11 different anti-squat settings using the inserts - thats taking in both high and low roll centres (+2 / -2) - and doesn't include the one settting that gives you 0.5 degrees of pro-squat (12 settings possible all together).

[Big G]

I thought I was wrong after I posted that hehe

[samd]

Originally Posted by Adam Skelding

They are 1,2 and 3 degree when using -2 rear bracket.
We are doing a Team Tech Tip, showing all the possible combinations of the anti squat blocks and inserts.

Cheers Adam