LAW43 ZX-5 New arms available now!

[InsideLineModels]

Originally Posted by Mr Eccleston

Just to clarify, can these be installed directly on a FS2, or do you need to change driveshafts.

Yep, Roger's correct, they just replace the old rear wishbones.. you need nothing other than the LAW43 kit.

Kev

[njc11]

Originally Posted by InsideLineRacing

I forgot to give feedback didn't I!

I've got to give you some credit Nick! they seem to be working pretty well . They definately sharpen the car up.

No worries mate... glad you feel its enhanced the car for you

Just need Mr Evdokas feedback now hes had them on for while...

[Mr Eccleston]

Thanks for the feedback with the LAW43 option, just wanted to confirm it was a straight swap, wasn't sure if required different driveshafts as oroginally mentioned using 62.5 axle, but think that was to do with the FS car.

Anyway, all sorted now, thanks again.

[Dufty07]

will these fit the sp, am running the rb5 shafts, arms etc.. on rear

[hloland]

yes, they will fit.

[RogerM]

If you use them with the UM510 62.5mm shafts you will be running the blue axle spacer INSIDE the hub, if using the UM522 65.5 axle there is no blue spacer.

Both options achieve the same track width, the UM510 option will give you better bump handling but less roll resistance, the UM522 option the opposite.

Hope that helps.