|
#21
|
|||
|
|||
![]()
I fully agree with SI previous post, the day also needs to be well organised so as not to look like a bunch of schoolboys!
You'd need 3 groups at all times and alternate, you'd need a heat of drivers, the marshals as usual, visible jackets would be an idea, and a third team to be handing out flyers promoting the club it's website etc etc Because obviously racing will attract the viewers to stop and this is the best chance to hand out the flyers and actually approach people rather than wait to be approached! I reckon this would be a great day for bury metro if it's done right! |
#22
|
||||
|
||||
![]()
Exactly Phil. But we don't need 30+ people to do it, 5-6 cars in a heat is quite enough as long as there are people on the track and racing around. Ideally I'd go for a heat of 2wds, heat of 4wds and a heat of trucks if we can get people for each, to show the different aspects. Best of all is if we can get some commentary going on on the mic too as its often not clear who is winning etc.
Aim for as little a gap between rounds as possible to keep the meeting flowing for spectators and as many rounds as we can squeeze in the day. Might need a lot of battery and charging power! Some nice flashy flyers and I'll 'borrow' some display boards as well.
__________________
Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available) |
#23
|
|||
|
|||
![]()
I don't know why we don't do commentary on club days
![]() |
#24
|
|||
|
|||
![]()
Going to see if I can make this si
If I can I'll bring my boy along too with his sumit? May make for some good viewing? Get it pulling something along etc |
#25
|
||||
|
||||
![]()
It would make the national news paper if it could pull budda??
|
#26
|
||||
|
||||
![]()
LOL!!
![]()
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#27
|
|||
|
|||
![]()
On it's own - nah
But I have two so maybe !! |
#28
|
||||
|
||||
![]()
Twerps
|
#29
|
||||
|
||||
![]()
Only if they are full sized ones....
__________________
Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available) |
#30
|
|||
|
|||
![]()
Hey SI
I will get some leaflets done if you want? I'm a designer after all... You would just need to sort printing costs? Most printers would do 300-400 A5 flyers for about £40 You may not even need that many. But you could do a "Universal" one that could be used elsewhere? |
#31
|
||||
|
||||
![]()
I'll get back to you on that - Various people are getting on board with this project so we might have a bit of useful backing to help with that.
__________________
Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available) |
#32
|
||||
|
||||
![]()
What's the crack with insurance does the club have public liability insurance?? Or is that covered by mosi ??
Will there be a barrier between the public and the racing?? |
#33
|
|||
|
|||
![]()
There certainly needs to be haha
|
#34
|
||||
|
||||
![]()
Especially if Mike is racing!
![]()
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#35
|
||||
|
||||
![]()
MOSI can provide fencing, but its the metal crowd barrier stuff so you don't want to go hitting it!
I'll know more when I find out where they are suggesting we run.
__________________
Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available) |
#36
|
||||
|
||||
![]() Quote:
Why don't you run 5 mins every 15 mins to space it out during the day I suspect there will be a lot of breakages with running on Tarmac/cobbles so get plenty of spares sorted also you need to think about tyres mini spikes will be bald in no time Si when you leaving don't bother picking your cars up just leave yours there where they belong ![]() |
#37
|
|||
|
|||
![]()
Surely buggys will go under the metal barriers isn't there a gap under it?
|
#38
|
||||
|
||||
![]()
That's why I suggested an outer and a inner fence remember it's a exhibition not a nuts out race don't want to hurt anyone
|
#39
|
||||
|
||||
![]()
I'd want to set the track to avoid breakages, cos it doesn't look good and means people can't run. The barrier is mostly to keep spectators off the track.
We might have a source for some RTR's to run 'have a go' sessions in between rounds which would space the racing out. I've had an offer of support from NNRC, so we'll have to see of we can run nitros as well. Not sure we'll have the space, but if we can the more the merrier and it will really show off RC. Best of all I'm doing this at work because the school think I'm talking to MOSI about taking kids there!
__________________
Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available) |
#40
|
||||
|
||||
![]()
Si
Don't worry about running the nitro's, think they will be to noisey for a museum ![]() But enough of us have 10th and we have timing equipment, would be good to hand some NNRC flyers out as well. |
![]() |
Thread Tools | |
Display Modes | |
|
|