Losi XX4 Improvements...

[tyreman]

Originally Posted by mayhem

leave the front brace off as bulk heads are cheaper than wish bones

Totally agree with you.
Here's a pictue anyway.

[MattADH]

If you remove some of the material at the front of the bulkhead where the brace hits, you can get it to sit square.

Use some longer pins and a spacer and there is less chance of the bent plate potentially causing the pins to bind!

[MattW]

I've done it the way Matt describes. As luck would have it, Schumacher Fireblade front pins are a good fit. They are a little long, but with an extra spacer it's good.

[ashleyb4]

So far i havent done any of these mods to the my xx4 and i dont really break that much. Personsally i dont see the point its amazing as it is.

A

[Southwell]

Because it makes it better lol. The CR mod is definately worth it, makes the rear end feel much better imo. Much more controllable when it's pushed hard.

[super__dan]

Originally Posted by mayhem

leave the front brace off as bulk heads are cheaper than wish bones

But you can normally finish a run with a damaged bulkhead (or forget and do about 3 meetings as I once did) but that's more difficult with a wishbone hanging off.