TRF502X carbon parts

[Fredrik Emilsson]

Thanks Alex. Always giving nice comments.
(But I think that Tamiyas designers can do much better than this.)

Jan: Not a silly question. They fit the 511 as well. Not as nice as the 502X though. As you probably know you only have one center hole on 511.

They actually fit between my 511 lipo trays as well. You can´t use together with long diff cover, but with short diff cover.

[Carno]

Originally Posted by Fredrik Emilsson

(But I think that Tamiyas designers can do much better than this.)

They're not doing any racing hop-ups however. Luckily there are enthousiasts like you.

Would you by any chance know if 502 shocktowers are the same as 511 ones?

[muratti]

As far as i know the 502X towers are different to the 511, is this right Fredrik?

[Fredrik Emilsson]

Sorry Carno, Johannes is correct...502X shock towers are different.

[Carno]

Thanks guys, I was afraid of that as there don't seem to be any 501/511 ones around anymore.

[Fredrik Emilsson]

I have a few 4mm rear shock towers for 501X/511, if you need them?

[Mr_M]

Fredrik, slight thread hi-jack (sorry!) - do you still have diff cover (short) and li-po trays available for the 501X ? Thanks

[Fredrik Emilsson]

Don´t have any short diff covers for 501X, only long ones.
Made short ones for 511 only.

Have lipo trays for both.

[Mr_M]

Ah, my mistake on the diff cover. Many thanks for the quick answer anyway - I'll email you to continue the discussion (and place an order!) so I don't drag this thread any further off topic

[Carno]

Originally Posted by Fredrik Emilsson

I have a few 4mm rear shock towers for 501X/511, if you need them?

Mainly looking for a front one as the one i'm using atm is cracked and a little bit wobbly.
Thanks though!

[Airwave]

Hi!

Sorry but how can I order some of these parts?

I'm very interested in the carbon spacer, to make the dampers work vertically...

[Fredrik Emilsson]

Small update!

Now I have all parts in stock:
TRF502X Carbon Lipo Tray: 16 euros
TRF502X Stainless Steel Weight Kit (11, 15 and 19 grams): 23 euros

TRF502X Battery straps (2 pieces): 16 euros

TRF502X 3.5 mm front shock tower: 13 euros
TRF502X 4 mm front shock tower: 16 euros

TRF502X 3.5 mm rear shock tower: 16 euros
TRF502X 4 mm rear shock tower: 21 euros

TRF502X Front Shock tower spacer (2mm): 5 euros
TRF502X Rear Shock tower spacer (2mm): 5 euros

Yes, the weight kit now made of stainless steel.
11, 15 and 19 grams. So you can add 19 or 30 (11+19) or 34 or 45...

[West Ridge Racing]

Those parts will do the part for sure!

You seem to possess great talent. Perhaps you could design a logo for me

[Fredrik Emilsson]

So, back to normal prices again.

TRF502X Carbon Lipo Tray: 15 euros
TRF502X Stainless Steel Weight Kit (11, 15 and 19 grams): 22 euros

TRF502X Battery straps (2 pieces): 15 euros

TRF502X 3.5 mm front shock tower: 12 euros
TRF502X 4 mm front shock tower: 15 euros

TRF502X 3.5 mm rear shock tower: 15 euros
TRF502X 4 mm rear shock tower: 20 euros

TRF502X Front Shock tower spacer (2mm): 5 euros
TRF502X Rear Shock tower spacer (2mm): 5 euros

[discothesnake]

Hi Fredrik,are these parts still available?

Dave

[Fredrik Emilsson]

Yes, I have all parts in stock.

Also an empty inbox now....

[Chris]

Fredrik,

Could you make a 3,5mm 502X rear tower with the wing mount holes 5mm up?

[Shifta]

I'd like 1 of these too

[Fredrik Emilsson]

No problem.

[Fredrik Emilsson]

Sale on 502X parts:

TRF502X Carbon Lipo Tray: 5 euros
TRF502X Stainless Steel Weight Kit (11, 15 and 19 grams): 10 euros

TRF502X Battery straps (2 pieces): 5 euros

TRF502X 3.5 mm front shock tower: 7 euros

TRF502X 3.5 mm rear shock tower: 7 euros