MP9

[colreid]

Hi Chris, In simplistic terms, spring rates/colours are as follows:-

long hard
IF348-916 9-1,6,L95 red
IF348-1016 10-1,6,L96 dark blue
IF348-1014 10-1,4, L95 light blue
IF348-1116 11-1,6,L95 lime green
IF348-1114 11-1,4, L95 dark green
IF348-1216 12-1,6,L95 purple
IF348-1316 13-1,6,L97 white
soft

medium hard
IS106-816 8-1,6,L84 dark blue
IS106-814 8-1,4,L84 light blue
IS106-916 9-1,6,L84 lime green
IS106-914 9-1,4,L84 dark green
IS106-1016 10-1,6,L84 purple
IS106-1116 11-1,6,L84 white
soft

short hard
IF350-716 7-1,6,L70 dark blue
IF350-714 7-1,4, L70 light blue
IF350-816 8-1,6,L70 lime green
IF350-814 8-1,4, L70 dark green
IF350-916 9-1,6,L70 purple
IF350-1016 10-1,6,L70 white
soft
__________________

Hope that helps you out a bit, I believe you can run the long springs in the rear using the medium setup; and it results in a slightly softer rate in comparison. I've not had chance to try this out personally though.

Fingers crossed I should be pitting with Rob at Stoke on the 28th, and I've got a most of the above springs; you're more than welcome to try some out, just give me a nudge.

Colin

[Chrislong]

Thats brilliant, cheers Colin! I'll print that out and acetate it to my pitbox . it will be good to meet more MP9 drivers . 28th march? okay I think im being pursuaded, its an NNRC meeting too that day ya'see, I'll see if Mahoonaburger and Brennan fancy it too.

Cree, I know Rob is using the lightweight chassis. Share some details and photos mate, im interested. I didn't know about it before Rob mentioned it. Are you doing any other MP9 stuff?

[njc11]

Originally Posted by rich_cree

What you all need is a nice extra lightweight chassis!

Go on... tell us more?

[rich_cree]

If anyone wants a chassis doing then just email me and I'll sort it out. Basically i'll take your std MP9 chassis and mill pockets in it to lighten it out and add a bit of flex (all for a very reasonable fee....)

Click on the logo below for more details and email me if you want to know more!

[carlin]

Originally Posted by rich_cree

What you all need is a nice extra lightweight chassis!

Oh yeah need little bit of lighter chassis too.
Found the car so much better, cheers Rich.

Might send it over to you for little bit more flex

[steelie600]

Originally Posted by Chrislong

Thats brilliant, cheers Colin! I'll print that out and acetate it to my pitbox . it will be good to meet more MP9 drivers . 28th march? okay I think im being pursuaded, its an NNRC meeting too that day ya'see, I'll see if Mahoonaburger and Brennan fancy it too.

Cree, I know Rob is using the lightweight chassis. Share some details and photos mate, im interested. I didn't know about it before Rob mentioned it. Are you doing any other MP9 stuff?

Nope NNRC is the 21st!!!!

[ryanlownie]

And then it's Bury on the 28th.

[Chrislong]

Ok done, NNRC 21st, then Stoke 28th...

[ryanlownie]

We still swapping for a round Chris?

[Chrislong]

For a round? Nope , but you can try it for a few laps in practice.

Like the new signature Ry, I need mine re-doing *hint hint*