Rebound Valves...a must or?

[Stuvon]

Are the rocker cranks screwed into the gearbox top straight? Before I got the X11 front end, I found it was very easy to screw them in on an angle and it caused the problem you discribed.

The X10 prop willl fit the X11 as I've used an X11 one in my X10.

I was looking at a D4 diff last night and thinking it might fit the pred. It sounds like it might be a plan! Thanks Pro4 nut!

[Molgorain]

Just took the hole front apart, and put it back together.
The rocker crank screws was straight, and now the drop-problem is gone.

Thanks for all the help, with this kind of community/people around a brand/label, is half the pleasure driving it.

[pro4nut]

no worries mate, i ran the x10 for 2 years but decided to move elsewhere this season.

[mattym0310]

so does this mean if I were to buy a hotbodies D4 front oneway it would fit my Pred x11??

[jeff jenkins]

just take some measurements of your x11 diff and make sure the d4 diff takes the same size bearings.. then you can determine if it will fit.