come on people when is this C4.1 out

[GRIFF55]

What are the rear toe in blocks made of?
Looks very nice! Stealthy.

S2 shell has always been one of my faves

[VinceB]

Nice looking car, I do like that bodyshell.
It's going to be interesting seeing how the production version compares with the likes of the Vega.

[Body Paint]

Originally Posted by GRIFF55

S2 shell has always been one of my faves

And mine ;-)

I am loving seeing this car wrapped in something I created, gives me goose bumps

[GRIFF55]

Do you get royalties on every kit sold then?

[tony12795]

Was wondering when you would post Craig!!!

I remember racing the S2 at the Belgium GP three years ago

[wezzer]

Originally Posted by Body Paint

And mine ;-)

I am loving seeing this car wrapped in something I created, gives me goose bumps

looks cool craig top job !!

[styleone]

Well Marc from MK called yesterday and it looks like we are go for this week chaps...I repeat StarShip Centro...you are cleared for launch!

[gordy]

any one no what the wheelbase of the centro is?

[Body Paint]

Originally Posted by GRIFF55

Do you get royalties on every kit sold then?

LMFAO.... I wish.... I'll have to make do with a "top job" off of Wezzer :-)

[gazhillAE]

Keith/wez

We need a indoor setup for Worksop

Can you upload one please

Also one for carpet if possible

Gaz

[wezzer]

ok will get on it and post as soon as :-)

[KRob]

Some set-ups from Worksop.
Not totally complete but there's enough info there:

Ben Jemison

Front shocks :
32.5wt #2 pistons
Kyosho yellow springs
Middle on tower inner on wishbone
Can't remember the limiters

Rear shocks
30wt #1 pistons
Ae silvers 2 limiters
2nd from inside on tower
Inner on wishbone.

Medium wheelbase
1degree anti squat
Rear link 3 holes from top
0 degree hubs
No front balltud
6.5 inch wing.
Reedy 8.5 - 78/23
Brass front bulkhead with brass brace
10g of weight underneath the steering rack


Paul Bradby

Front Shocks:
30wt #2's
Silvers
Inner on tower
Inner on wishbones

Rear Shocks:

30wt #1's
Ae green springs
Inner on wishbone
2nd hole from inside on tower

Medium wheelbase
1 degree anti squat
Rear link 2 holes from top
0 degree hubs
1 front ball stud washer
6" jconcepts wing
Lrp 7.5- 23/78
Brass bulkhead Delrin brace
42 grams under steering rack / servo horn
30 degree hubs
Steering arms middle on caster block

CML are just modifying the set-up sheet to suit the finished car so we'll get the finished articles up as soon as we can.

[Chippy96]

It looks like a Mardave Cobra with B4 front suspension and the gearbox turned around (before all the slagging starts,i`m joking!!!)

[gazhillAE]

Originally Posted by KRob

Some set-ups from Worksop.
Not totally complete but there's enough info there:

Ben Jemison

Front shocks :
32.5wt #2 pistons
Kyosho yellow springs
Middle on tower inner on wishbone
Can't remember the limiters

Rear shocks
30wt #1 pistons
Ae silvers 2 limiters
2nd from inside on tower
Inner on wishbone.

Medium wheelbase
1degree anti squat
Rear link 3 holes from top
0 degree hubs
No front balltud
6.5 inch wing.
Reedy 8.5 - 78/23
Brass front bulkhead with brass brace
10g of weight underneath the steering rack


Paul Bradby

Front Shocks:
30wt #2's
Silvers
Inner on tower
Inner on wishbones

Rear Shocks:

30wt #1's
Ae green springs
Inner on wishbone
2nd hole from inside on tower

Medium wheelbase
1 degree anti squat
Rear link 2 holes from top
0 degree hubs
1 front ball stud washer
6" jconcepts wing
Lrp 7.5- 23/78
Brass bulkhead Delrin brace
42 grams under steering rack / servo horn
30 degree hubs
Steering arms middle on caster block

CML are just modifying the set-up sheet to suit the finished car so we'll get the finished articles up as soon as we can.

Cheers Keith
1) I thought the anti squat was a standard 2 degree and couldn't be changed?

2) Can you confirm if the rest of the team are using AS9730 plastic zero degree rear hubs and not the alloy ones etc. I'm guessing standard in the set up sheet means these from when I last spoke to bradders!

3) is no one using ghea pistons this season or last in the c4???

4) what are the best ways to secure the shell on the sides?

5) Any news on the new shell wez is looking at doing?

6) Are the c4.1 wings going to be available separately or not?

Thanks that is all

[gazhillAE]

Originally Posted by wezzer

ok will get on it and post as soon as :-)

Thanks wez!

Few questions above for you both !!!!
Have any kits been shipped yet to the shops?

[westie]

Originally Posted by gazhillAE

Thanks wez!

Few questions above for you both !!!!
Have any kits been shipped yet to the shops?

Shopd are picking them up today i believe

[Stuweatherman]

Originally Posted by gazhillAE

Thanks wez!

Few questions above for you both !!!!
Have any kits been shipped yet to the shops?

Delivered this morning!!

[wezzer]

Originally Posted by gazhillAE

Cheers Keith
1) I thought the anti squat was a standard 2 degree and couldn't be changed?

2) Can you confirm if the rest of the team are using AS9730 plastic zero degree rear hubs and not the alloy ones etc. I'm guessing standard in the set up sheet means these from when I last spoke to bradders!

3) is no one using ghea pistons this season or last in the c4???

4) what are the best ways to secure the shell on the sides?

5) Any news on the new shell wez is looking at doing?

6) Are the c4.1 wings going to be available separately or not?

Thanks that is all

1) the rear pin block can be flipped to give 1 or 2 degrees of anti-squat ( its marked on the block )



2) yes they are , but that’s down to them wanting to run/try 0 degree hubs and i think they just used the plastic ones to test and stuck with them.



3) as far as i am aware no , but that may change!



4) i would personally take an off cut of the shell say 1 inch square and bend it through 90 degree, then slip it between the lipo cradle and chassis using them to clamp it in place. then a dab of Velcro on the shell and body and that should be it ( i am going to do a small report on how i did it on mine and post it up )



5) working on it and as soon as i have the first pull on the new design and we are happy i will let you all know



6) not as far as i am aware no but i will ask the question and push for it to be sold separately.

[Pownabown]

First part of mine has arrived today. (The rear chassis brace) LOL
should have the rest of mine later today or tomorrow morning

Ive built everything from my b4.1 kit up ready.
All i need to do it screw to chassis and fit my already paint shell and wing

[chuckie stella]

Will try to post pics of mine later tonight!