batley supercup

[vinny20]

Originally Posted by stegger

How come you didn't finish the final vinny??? If your wondering i'm the scouser sat next to you

i was doing ok but u no the carpet has high traction when i got off the car went like a rocket but wen i hit breaks the car hit the wall and broke the rear wishbone but the floor was very slipy and thats one thing i didnt like

[super__dan]

Originally Posted by vinny20

i was doing ok but u no the carpet has high traction when i got off the car went like a rocket but wen i hit breaks the car hit the wall and broke the rear wishbone but the floor was very slipy and thats one thing i didnt like

Vinny, ref your wanting to max out the rear width and the slippy floor, I kept meaning to say something but the back end of your car needs some other work. The diff and slipper need setting up and the rear oil must be VERY light (or leaked) as when you got on the power where I was marshalling the rear nearly hit the floor as it seemed so soft.

I'm not having a go, just that there is some things to work on before altering the rear track etc. Will you be racing outdoors at Batley? If so I'll help as much as I can next time I see you.

[footey]

when is the first outdoor at batley dan

[super__dan]

9th March was discussed depending on outcome of this sat's work party. Which reminds me I need to start a thread about that!

Obviuously depends on weather on the day!

[Chrislong]

I think the loss of drive was due to motor moving. Vinny was using the supplied "L" shaped allen keys to tighten stuff, thats why I brought your car to my bench mate - I got another 1/8th of a turn on your screws using proper wrenchs and thats not overtightening.

Vinny, I can;t recommend using the correct Hudy tools enough, they're an invalueable peice of equipment - and it can be the difference between finishing the race and not.

[vinny20]

Originally Posted by Chrislong

I think the loss of drive was due to motor moving. Vinny was using the supplied "L" shaped allen keys to tighten stuff, thats why I brought your car to my bench mate - I got another 1/8th of a turn on your screws using proper wrenchs and thats not overtightening.

Vinny, I can;t recommend using the correct Hudy tools enough, they're an invalueable peice of equipment - and it can be the difference between finishing the race and not.

cheers chris i needed help on the car rhen and since my garden is big i have giving the car a few runs and it is runing smoother than ever befour

[b4rs]

i bougth the AE hex drivers , all on ebay for £20, best thing ive bought rc wise. i had problems with my motor moving loads of times when i first started out.

[vinny20]

Originally Posted by super__dan

Vinny, ref your wanting to max out the rear width and the slippy floor, I kept meaning to say something but the back end of your car needs some other work. The diff and slipper need setting up and the rear oil must be VERY light (or leaked) as when you got on the power where I was marshalling the rear nearly hit the floor as it seemed so soft.

I'm not having a go, just that there is some things to work on before altering the rear track etc. Will you be racing outdoors at Batley? If so I'll help as much as I can next time I see you.

yep i will be at batley just let me no were i can find u and ill let have a look at the car and u can help me set it up but i think the diff is not a problem

[b4rs]

dan or chris will sort you out vinny, batley aint short of people who can sort it for you if you ask.

luckily i got my bitch mark (MRD) lol jokin, he sorts all my rc stuff out, but i learn stuff when he fixes it, and its all in the process of learning.

[barnyard]

There wasn't oil in any of the shocks dan.

Vinny you need to consult the manual before doing anything else to figure out where those o-rings live that you had halfway up the shock bodies. If they are the ones that go in the shock tops this will be the reason you had no oil.

for a setup for the rb5 robin lucas was running one and his car looked good might be a good starting point in the kyosho section but i haven't looked.

[vinny20]

yeah its done now iv took the car out to the maximum width its running smooth now

[Oscar]

Originally Posted by super__dan

depending on outcome of this sat's work party.

???? SUNDAY !!!
See news page of batley club site

[Northy]

Originally Posted by super__dan

9th March was discussed depending on outcome of this sat's work party. Which reminds me I need to start a thread about that!

Obviuously depends on weather on the day!

You never did though.......

G

[Northy]

Originally Posted by Oscar

???? SUNDAY !!!
See news page of batley club site

John, I think you'll find a lot of the willing people at Worksop

G

[Andy 2]

what needs doing

[Northy]

All the sludge and shite cleaning out of the container from the flood

G

[super__dan]

Originally Posted by Oscar

???? SUNDAY !!!
See news page of batley club site

Oh, I was 100% defo told sat.

I can't come then, sorry!

Dan

[Northy]

I'm sure Diane said saturday too.....

G

[Mrs oOple]

Why don't we do a saturday meeting for those who will be at Worksop on Sunday, then anyone who wants to do Sunday come along and continue what's started?

[vinny20]

so i take it everyone is going to batley