can any one help

[dubz]

hi what size pinion do I use on this track i have a k1 running a 8.5 motor with a 98 spur gear can anyone help thanks

[The Technician 07]

Hi mate, im running a k1 with a 6.5t motor, standard spur (98) and a 20 tooth pinion, this tends to be ok for me with any track design at ribble cos of the limited space.

[dubz]

thanks mate what about the oil in the shocks

[madmax]

if you are not shure of a base setup then a good start is 30wt rear 40 / 45wt front, pistons will also play a part in damping I would start with 3 hole pistons all round