setting up rear pod ride height

[moggy12]

i have a rc12r5.1 all setup fine apart from rear pod all car ride height is 3.5mm but at the back of the car (rear pod) its only 3mm ride height if i screw in the shock makes no difference to the pod ride height how do i get the pod same ride height has rest of chassis ? thanks for any replys

[RudolfXC]

Originally Posted by moggy12

i have a rc12r5.1 all setup fine apart from rear pod all car ride height is 3.5mm but at the back of the car (rear pod) its only 3mm ride height if i screw in the shock makes no difference to the pod ride height how do i get the pod same ride height has rest of chassis ? thanks for any replys

You need to replace the rear axle inserts that are available in varying offsets.

[Robocop]

I have not had a r5.1 but the rest are as this take the diff off the car then there should be plastic oval pieces what the bearing sits in thats the part you change to alter ride height.
If you flip the part that is in the car it will either raise the ride height or lower it more if thats the only ones you have you need to get replacment ones which allow you to do it.

[moggy12]

thanks for info all sorted now