SupaStox GT12 / Show Your Ride

[RudolfXC]

I got the car and 21.5 motor second hand so am going to try 2S:



If I don't like it, I'll remove one cell and put the speedo there connected to a 13.5.

[russmini]

Originally Posted by mark christopher

Did you get your pit towel on your table early

You gotta be joking Mark, that's one part he did not inherit in his 1/4 ness... lol. Always the last to arrive, full stop!

[Ritchie T]

Haha ay i was on time though you eager beaver

Not sure about stickers

Get the bearings out you cheat :P

[Martyn (Bomber)]

Originally Posted by RudolfXC

I got the car and 21.5 motor second hand so am going to try 2S:



If I don't like it, I'll remove one cell and put the speedo there connected to a 13.5.

If it's too fast just cap the throttle on your Tx, I am now finishing off a 2s SupaStox and mine will have a 13.5 , I ran a Mardave a couple seasons ago with 2s and 13.5 and it was up with the Touring cars for laps (the track at my club is more for 1/12th tho), by the way I would recommend a diff for 2s

[BeachBuggyPhil]

Have you decided on a motor yet Martyn?

[Martyn (Bomber)]

I'm so impressed with the Orion Vortex Pro Mod 6.5 that I've been running in my SV2 that I will be going for the 13.5 version in my SupaStox, I've had to get it ordered in tho as there impossible to get hold of straight from a shop in the UK.

[russmini]

Originally Posted by Ritchie T

Get the bearings out you cheat :P

Having bearings in the front is Not Cheating... It's called being practical and making something work as it should.

I look forward to your bushes wearing out and slop in your front wheels, then the moans of your useless changing camber and dodgy handling.....

[Ritchie T]

Ay if it was the nats youd be in a seperate class!

I can replace bushings when they wear

[Martyn (Bomber)]

Originally Posted by Ritchie T

Ay if it was the nats youd be in a seperate class!

I can replace bushings when they wear

I've heard loads of people say they get hot and start sticking before they wear, I just went straight for bearings as it will just end up that way in the end with the power that is being put through these things now

My Mardave was a different car after converting to front bearing last season

[Ritchie T]

Originally Posted by Martyn (Bomber)

My Mardave was a different car after converting to front bearing last season

[russmini]

It's ok, he's read the rules correctly now and will be fitting Bearings on Friday night, before racing....

[coolcam]

[russmini]

Think a resize is needed there Cam !!!!

Oh and i can see a spot where you could fit another sticker in !!!!!

[neallewis]

Coolcam, what green paint is that?

[PaulUpton]

just shell to cut out and tru tyres then ready to go

[Martyn (Bomber)]

Originally Posted by PaulUpton

just shell to cut out and tru tyres then ready to go

Nice looking install Paul, I notice you have the rear springs setup on the outer holes, are you going to be racing Oval or Circuit ???

The only reason I ask is that everyone seems to run them on the inner holes for Circuit.

[mark christopher]

Originally Posted by Martyn (Bomber)

Nice looking install Paul, I notice you have the rear springs setup on the outer holes, are you going to be racing Oval or Circuit ???

The only reason I ask is that everyone seems to run them on the inner holes for Circuit.

not true

have a look here http://www.facebook.com/#!/groups/336445139755237/

[Martyn (Bomber)]

Originally Posted by mark christopher

not true

have a look here http://www.facebook.com/#!/groups/336445139755237/

Oh I see, thanks

[Matt cannon]

Here is my supastox 1S car.







It will be both it's and my second outing at c.a.r.s. Tonight, still have to get the setup 100% which is hard when you've had a couple of decades off of RC racing and are trying to get used to a wheel rather than sticks. Hope you guys like her. Cheers matt.

[Steveonamission]

A few Supastox shells I have painted.

Hope you like.