Kyosho SCR-SP

[snowmiu19]

Hello there all

Anyone here drives the Ultima SCR-SP. Want to see some of your bodyshell and how you make the body. i got the Proline Chevy but not sure how to fit the part for the side that acts as a fin.

Also does anyone make a chassis dust protector cover for Kyosho SCR? This is to just protect the expose electronics to dust. Something like those of the AE SC10.

Thanks

Regards
Calvin

[Neil Skull]

2wd SC is not very popular in UK i only know a handful that run it.
You might get more help on RC Tech.

[Adam F]

Here is my SC-R with a proline flotek fitted..

For protection I would say an RB5 shell trimmed to suit, not perfect but it offers some cover..

[snowmiu19]

Originally Posted by x313

Here is my SC-R with a proline flotek fitted..

For protection I would say an RB5 shell trimmed to suit, not perfect but it offers some cover..

For the wing panel do you use the standard screw and nut to hold it in place?

Regards
Calvin

[hloland]

JConcepts makes overtray for the SC trusks. (SC-RTR, SC SP and SC-R the SP has the same chassis length)
http://www.ebay.com/itm/NEW-JConcept...item5ae60f09c1

[Adam F]

Originally Posted by snowmiu19

For the wing panel do you use the standard screw and nut to hold it in place?

Regards
Calvin

Yup, and a bit of double sided tape.

[snowmiu19]

Originally Posted by x313

Yup, and a bit of double sided tape.

will your front wheel rub the body? cos when mounted on, if front suspension compress while turning it hit the bodyshell

Regards
Calvin

[Adam F]

Nope, doesn't seem too, although I run hard losi springs so its pretty stiff..